Light Panel Connector Source

[Bill D 2,843]

Anyone got a source for replacement light panel connectors?

[lynnmor 8,815]

Maybe if you would clean it up and take a photo of the mating part we could get an idea of what you need.  Digi-Key might be a good place to search.

[Bill D 2,843]

I'll try to find some photos of a similar part.  The pieces in the photo have been discarded. 

[Bill D 2,843]

Here's a screen shot of a board from ebay. 

[pfrederi 20,526]

Put some black tape over the holes in the instrument panel and forget it.  Never understood why I need a light to tell me I have my foot on the brake  or stood up.  That is why I only have one modern horse and much prefer old simple designs.

[WHX?? 56,574]

1 hour ago, pfrederi said:

black tape over the holes in the instrument panel and forget it. 

Don't listen to him Bill I'm a purist too. 

Try searching in electronic supply houses. Waytec comes to mind. 

https://www.waytekwire.com/?utm_source=google&utm_medium=cpc&utm_campaign=1452548056&utm_term=waytek&utm_content=&gad_source=1&gad_campaignid=1452548056&gbraid=0AAAAADzbIvYN7fOZ_BO69jr6Y03Ets7Cy&gclid=EAIaIQobChMI9bmNk5rLlAMVHk7_AR31oiF6EAAYASAAEgL-Z_D_BwE

 

Wasn't there a guy here that used to rebuild those boards? Maybe he would know. 

Edited yesterday at 08:22 PM by WHX??

[lynnmor 8,815]

Go to the Digi-Key website and search for card edge connectors, you need to measure the pitch to get the spacing right.  Just measure over all of them and divide by the number of spaces.  Apparently there is a bracket involved not showing on the eBay photos.

[JoeM 9,912]

Bill this one came off of a 312-8

Will it work for you?

 

[gwest_ca-(File Mod) 12,231]

If I remember correctly SOI determined all boards operated the same

 

110999 panel introduced in 1986 through 1988 for 312, 414 and 416 models -  Replaced by 115207

111000 panel introduced in 1986 through 1988 for 417 and 420 models -  Replaced by 115207

115207 panel introduced in 1989 through 1990 - (Page 3-12 of the Demystification Guide does not apply to the idiot light module. Should be page 3-13)

114825 idiot light module used 1990-1997 and replaced by 115207 - (Page 3-12 of the Demystification Guide does not apply to the idiot light module. Should be page 3-13)

 

79-2130 idiot light module used 1991-1997 on the 520 models - (Page 3-12 of the Demystification Guide does not apply to the idiot light module and page 3-13 is a different module. 79-2130 should not be listed.)

 

82-12o502* - Correct

82 -12o502 - Not correct

82-12o502 - Suspicious and not checked or determined yet

 

110999 Light circuit board used on

1986 models 21-12K802*, 21-12K803*, 21-12KE01*, 21-12KE02*, 22-11B502*, 22-12TE01, 31-14K801*, 31-16K802*

1987 models 21-12K804, 21-12KE03, 31-14K802, 31-16K803, 32-11B301, 32-11B501, 41 -18KE01, B2-11B392

1988 models 21-12K805*, 31-14K803*, 31-16K804*, E1-12K801*

 

111000 Light circuit board used on

1986 models 31-17K802*, 31-17KE02*, 31-20KE01*

1987 models 21-12K804, 21-12KE03, 31-14K802, 31-16K803, 31-18K801*, 31-18KE01*, 41 -18KE01

1988 model B1-16O801*

 

115207 Light circuit board used on

1988 models 22-17KE01*, Not used on 22 -13KE01

1989 models 22-17KE02*, Not used on 22 -13KE02

[Bill D 2,843]

1 hour ago, JoeM said:

Bill this one came off of a 312-8

Will it work for you?

 

PM sent.