Bill D 2,842 #1 Posted 5 hours ago Anyone got a source for replacement light panel connectors? Share this post Link to post Share on other sites
lynnmor 8,813 #2 Posted 5 hours ago Maybe if you would clean it up and take a photo of the mating part we could get an idea of what you need. Digi-Key might be a good place to search. 1 Share this post Link to post Share on other sites
Bill D 2,842 #3 Posted 4 hours ago I'll try to find some photos of a similar part. The pieces in the photo have been discarded. Share this post Link to post Share on other sites
Bill D 2,842 #4 Posted 4 hours ago Here's a screen shot of a board from ebay. Share this post Link to post Share on other sites
pfrederi 20,499 #5 Posted 3 hours ago Put some black tape over the holes in the instrument panel and forget it. Never understood why I need a light to tell me I have my foot on the brake or stood up. That is why I only have one modern horse and much prefer old simple designs. 3 1 Share this post Link to post Share on other sites
WHX?? 56,568 #6 Posted 2 hours ago (edited) 1 hour ago, pfrederi said: black tape over the holes in the instrument panel and forget it. Don't listen to him Bill I'm a purist too. Try searching in electronic supply houses. Waytec comes to mind. https://www.waytekwire.com/?utm_source=google&utm_medium=cpc&utm_campaign=1452548056&utm_term=waytek&utm_content=&gad_source=1&gad_campaignid=1452548056&gbraid=0AAAAADzbIvYN7fOZ_BO69jr6Y03Ets7Cy&gclid=EAIaIQobChMI9bmNk5rLlAMVHk7_AR31oiF6EAAYASAAEgL-Z_D_BwE Wasn't there a guy here that used to rebuild those boards? Maybe he would know. Edited 2 hours ago by WHX?? Share this post Link to post Share on other sites
lynnmor 8,813 #7 Posted 1 hour ago Go to the Digi-Key website and search for card edge connectors, you need to measure the pitch to get the spacing right. Just measure over all of them and divide by the number of spaces. Apparently there is a bracket involved not showing on the eBay photos. Share this post Link to post Share on other sites
