Kohler K series rear oil seal.... NAPA has a seal I'm gonna try

[Razorback 1,300]

Regarding Kohler K series rear oil seal p/n 4703207: I found that NAPA has a seal that says it replaces that part..... NAPA Part #: SME 704003

 

NAPA seal, replacement for Kohler 4703207

 

I have one coming Saturday..... priced today at $7.71. I'll report back when I get it installed to comment about the fit...... then follow up later when I get some run time on it.

 

(I had an oil leak on my Cub Cadet 123 that has a K301 in it. This will also apply to my Wheel Horse C160, and will apply to any K series engines that use 4703207)

[ebinmaine 78,632]

Good price

[WHX?? 56,469]

As long as the ID/OD  and thickness match up. 

[Razorback 1,300]

45 minutes ago, WHX?? said:

As long as the ID/OD  and thickness match up. 

One can only hope….

I.D.: 1.500"

 

O.D.: 2.378"

W: .250"

 

Specifications

Brand	NAPA
Replaces OE Part #	47-032-07
Engine Manufacturer	Kohler
Engine HP Rating	10 hp
VMRS Code	065004020
Outside Diameter	2.378 in
Width	0.25
Fits Engine Model #	K241

Edited 8 hours ago by Razorback

[Andy N. 2,743]

11 hours ago, Razorback said:

 

I have one coming Saturday..... priced today at $7.71.

 

Good find. I just ordered one from Amazon for $12 yesterday morning and it won't be here until 5/20.

[squonk 46,364]

1 hour ago, WHX?? said:

As long as the ID/OD  and thickness match up. 

In actuality it's the Kohler #

[Razorback 1,300]

1 hour ago, squonk said:

In actuality it's the Kohler #

I don’t understand…. Please elaborate.

[WHX?? 56,469]

1 hour ago, squonk said:

In actuality it's the Kohler #

 

35 minutes ago, Razorback said:

I don’t understand…. Please elaborate.

Really ... watch you talkin about willis ....

[squonk 46,364]

 

( I saw the Kohler # and knew for the past year and a half all Napa small engine uses O.E. #s') 

 

47-032-07S is the Kohler #.  All Napa small engine has switched to Kohler #'s without the dashes and S at the end. You are probably getting some old stock that has been sitting around at a Napa Warehouse still in the old Primeline/Napa Small Engine package. For example The 704003 shows 1 in the Buffalo Dist. Center and 1 in Carlisle. That's it for the NE. They may not even stock the Kohler # in the future. Who knows. 

 

I used the Napa/  Primeline products for years with good results.

[pfrederi 20,461]

I have always wondered about the crank seals.  Normally I can cross reference all the seals on my WHs to CR/skf...but not the crank shaft seals...