Sunstrand 90 basket case

[mnelles 1]

I got a Sunstrand 90 out of a Charger 12 (I think) from someone that came disassembled in a box. I have a basic idea of how to put it together but I'm not 100% sure on axle lengths (seems like one is slightly shorter) and a couple other small things. Any good manuals or videos? 

[953 nut 65,680]

Here is a link to the Sundstrand manual which may be helpful. Member @daveoman1966 is probably going to be able to answer the axle question.

 

[WHX?? 56,391]

I guess my question is why was it disassembled? internal issues? Might want to post some pics of the wear parts and see if the boys can spot some issues.  Shouldn't be too hard to figure out which axle goes in which case by how the differential sits in the cases. 

[mnelles 1]

Story I got was it needed axle seals. I put seals in it and started reassembly but  it was torn apart way further than needed. Axles seem to be about a 1/4" ish different. I'm guessing it got taken apart and they forgot how it went back together. I acquired it from someone that got it in a pile of stuff from an auction. I haven't taken one apart ever but I thought I'd try to rebuild/reassemble it for the practice and education.

 

[Ed Kennell 45,908]

34 minutes ago, mnelles said:

Story I got was it needed axle seals

It;s not necessary to disassemble to install new axle seals.

[oliver2-44 11,455]

As mentioned, post some pictures.

Also on reassembling hydraulics cleanliness paramount.

[pfrederi 20,409]

Need to see pics of slippers valve plate to see if it is worth messing with

[WHX?? 56,391]

8 hours ago, Ed Kennell said:

It;s not necessary to disassemble to install new axle seals.

That can be done with the tranny still in the tractor. A case of some people should not be allowed to wrench?!?!?

[ineedanother 2,231]

21 minutes ago, WHX?? said:

 A case of some people should not be allowed to wrench?!?!?

Well, if they just do a search it would probably lead them here and to a different outcome...