ineedanother 2,155 #1 Posted Sunday at 02:33 AM Not sure what the end game is for this but it's too good to let go. It's got some issues but is largely original. I'm going to start with a gearbox for axle issues and penetrol treatment to preserve the patina... 7 3 1 Share this post Link to post Share on other sites
ebinmaine 78,462 #2 Posted Sunday at 12:04 PM Good looking original there. Definitely worth the effort of saving. Some touch ups here & there and you'd have a great rig. 2 Share this post Link to post Share on other sites
kpinnc 18,007 #3 Posted Sunday at 06:21 PM 15 hours ago, ineedanother said: too good to let go Agreed 100% 2 Share this post Link to post Share on other sites
ineedanother 2,155 #4 Posted Sunday at 06:58 PM Lots going on today other than tractors but I'll get some of it done... 1 Share this post Link to post Share on other sites
ineedanother 2,155 #5 Posted Sunday at 07:56 PM The drain plug is stripped so no draining the ATF but I did manage to get the good hub off and that axle looks fine. 1 Share this post Link to post Share on other sites
ineedanother 2,155 #6 Posted Sunday at 09:23 PM I forgot I could drain the case from the bottom of the motor, 3 quarts of clean ATF. Pulled the pump and motor to make it more manageable from a weight perspective. Found a nice comfy nest of insulation and nuts in with the controls. Got the gear box off and will get the frame cleaned up but everything looks good and solid. I would really like to have a roller again today but my old self is close to done getting up and down off this floor. 2 2 Share this post Link to post Share on other sites
ineedanother 2,155 #7 Posted Sunday at 11:17 PM Well, it's a roller. I really could have had it all back together today but too many other distractions and no ATF on the shelf either. Tomorrow's another day... 3 Share this post Link to post Share on other sites
ineedanother 2,155 #8 Posted Monday at 11:51 PM I have power. Converting over to 10-30 so need to drain the lift cylinder and have a list of other things to address but this was a big line item 1 Share this post Link to post Share on other sites
