ineedanother 2,146 #1 Posted yesterday at 02:33 AM Not sure what the end game is for this but it's too good to let go. It's got some issues but is largely original. I'm going to start with a gearbox for axle issues and penetrol treatment to preserve the patina... 7 3 1 Share this post Link to post Share on other sites
ebinmaine 78,437 #2 Posted yesterday at 12:04 PM Good looking original there. Definitely worth the effort of saving. Some touch ups here & there and you'd have a great rig. 2 Share this post Link to post Share on other sites
kpinnc 17,984 #3 Posted 22 hours ago 15 hours ago, ineedanother said: too good to let go Agreed 100% 2 Share this post Link to post Share on other sites
ineedanother 2,146 #4 Posted 22 hours ago Lots going on today other than tractors but I'll get some of it done... 1 Share this post Link to post Share on other sites
ineedanother 2,146 #5 Posted 21 hours ago The drain plug is stripped so no draining the ATF but I did manage to get the good hub off and that axle looks fine. 1 Share this post Link to post Share on other sites
ineedanother 2,146 #6 Posted 19 hours ago I forgot I could drain the case from the bottom of the motor, 3 quarts of clean ATF. Pulled the pump and motor to make it more manageable from a weight perspective. Found a nice comfy nest of insulation and nuts in with the controls. Got the gear box off and will get the frame cleaned up but everything looks good and solid. I would really like to have a roller again today but my old self is close to done getting up and down off this floor. 1 2 Share this post Link to post Share on other sites
ineedanother 2,146 #7 Posted 18 hours ago Well, it's a roller. I really could have had it all back together today but too many other distractions and no ATF on the shelf either. Tomorrow's another day... 2 Share this post Link to post Share on other sites
