FLtractor 157 #1 Posted 4 hours ago Afternoon, In process wiring new ignition.. what is supposed to go in these black plastic plugged holes? Cigarette lighter goes in.. larger one? What about smaller? Share this post Link to post Share on other sites
Thegearhead0324 1,445 #2 Posted 4 hours ago It’s not exact but very similar, should go little something like this pic of my 1257. 1 Share this post Link to post Share on other sites
ri702bill 11,725 #3 Posted 3 hours ago With the "Ejector Seat" lever on the lower left!! 2 Share this post Link to post Share on other sites
squonk 46,038 #4 Posted 3 hours ago 2 minutes ago, ri702bill said: With the "Ejector Seat" lever on the lower left!! There's a nut you tighten to make that latch movement a little stiffer. I was driving along a few years back and didn't notice that lever vibrated rearward. Next thing I knew the tractor was 10 feet in front of me and pulling away! 2 Share this post Link to post Share on other sites
FLtractor 157 #5 Posted 2 hours ago 1 hour ago, Thegearhead0324 said: It’s not exact but very similar, should go little something like this pic of my 1257. Thank you for the picture… do you happen to have a link for that beautiful chrome lighter that matches? You got that dash decal from redoyourhorse? Share this post Link to post Share on other sites
Thegearhead0324 1,445 #6 Posted 2 hours ago @FLtractor , the cig lighter is original, also works too. The decal I got from redoyourhorse, there are a lot of decals on there, very good quality as I’ve ordered a few times. Share this post Link to post Share on other sites
FLtractor 157 #7 Posted 1 hour ago 12 minutes ago, Thegearhead0324 said: @FLtractor , the cig lighter is original, also works too. The decal I got from redoyourhorse, there are a lot of decals on there, very good quality as I’ve ordered a few times. Oh ok. Thank you for the info 1 Share this post Link to post Share on other sites
