FLtractor 146 #1 Posted 15 hours ago (edited) Evening, My 856.. rear wheels heavily rusted due to calcium chloride, has hub caps on both wheels.. Given the aluminum can’t rust but can corrode.. is it possible they’ve been on there so long with so much rust, upon removal they simply disintegrate? If not.. what’s the recommended way to remove them off the wheels… would like to polish them up? Edited 14 hours ago by FLtractor Share this post Link to post Share on other sites
Retired Wrencher 6,528 #2 Posted 7 hours ago (edited) I would say small moves all the way around the caps or moons. A long screw driver or small prybar. Send up a picture of them if you can. How do you like the 856? This one came from the big show a few years back. I like it. Edited 7 hours ago by Retired Wrencher 3 Share this post Link to post Share on other sites
sqrlgtr 2,384 #3 Posted 6 hours ago 856 one of my Favorites. This one came back with me from Big Show last year. Share this post Link to post Share on other sites
953 nut 64,784 #4 Posted 5 hours ago I use a 7" wonder bar, work your way around the edge like @Retired Wrencher said. 2 1 Share this post Link to post Share on other sites
peter lena 9,804 #5 Posted 5 hours ago @ FL TRACTOR , penetrating oil drive around , then wonder bar , pop off , regularly put lubrication on anything , for cleaning and rust tracking stop , pete Share this post Link to post Share on other sites
