Joshyg 1 #1 Posted 14 hours ago Does anyone know the difference between the Kohler k321as and the k321s Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,051 #2 Posted 12 hours ago 2 Share this post Link to post Share on other sites
WHX?? 55,579 #3 Posted 11 hours ago (edited) AS has the short base for short frame and later shaker plate tractors. Edited 11 hours ago by WHX?? Share this post Link to post Share on other sites
JCM 10,909 #4 Posted 5 hours ago 6 hours ago, WHX?? said: AS has the short base for short frame and later shaker plate tractors. Whose better than you. 1 Share this post Link to post Share on other sites
Joshyg 1 #5 Posted 3 hours ago Will a k321s fit on a c145 Share this post Link to post Share on other sites
pfrederi 20,032 #6 Posted 2 hours ago You will have to remove the shakerplate set up and make a lower mount for the PTO hoop. If the K321 oil pan isn't drilled and tapped for bolts on the PTO side you may have to use J hooks. 3 Share this post Link to post Share on other sites
Pullstart 69,145 #7 Posted 2 hours ago (edited) But the engine block is all the same. I’d suggest if you have a donor engine, use its oil pan and run it. If not, that’s ok too. Just make sure that the crankshaft height is where it needs to be, for the belt guard to properly clutch with the belt. Edited 1 hour ago by Pullstart 1 Share this post Link to post Share on other sites
