horseman with no horse 60 #1 Posted 14 hours ago im wondering if i can stick my 16 hp side cover on my 18 hp as my 18 has a missing dipstick tube, will the crank fit? and will the dipstick be accurate? Share this post Link to post Share on other sites
horseman with no horse 60 #2 Posted 14 hours ago also how do i get the friggen pcv that sits in the valley off? its got one long bolt and idk if it pulls right off or slides, or what. i reefed on it and cracked the nipple on it the the pcv hose goes on Share this post Link to post Share on other sites
horseman with no horse 60 #3 Posted 14 hours ago (edited) the nipple on the PCV question Edited 13 hours ago by horseman with no horse Share this post Link to post Share on other sites
gwest_ca-(File Mod) 12,015 #4 Posted 12 hours ago We may have the B&S service manual but do not know the model and spec number of your engine. Post those and will link you to it if we have it. This may be it 1 Share this post Link to post Share on other sites
Achto 31,118 #5 Posted 3 hours ago To my limited knowledge, I believe the 16 & 18 hp blocks are the same. 1 Share this post Link to post Share on other sites
horseman with no horse 60 #6 Posted 1 hour ago they are not the same, the bore and stroke are different the front of the crank where it goes into the babbit is different and briggs made 3 different size o rings for the sump cover to block for the oil pressure. which now that im thinking about it is anther factor. im gonna get some model numbers to help narrow it down 1 Share this post Link to post Share on other sites
