Bert 778 #1 Posted Tuesday at 12:33 AM I found this one on marketplace for $150. Its mostly trash but is a solid foundation. I was able to get it running but it’s a oil burner. IMG_1219.mov 2 9 Share this post Link to post Share on other sites
8ntruck 8,612 #2 Posted Tuesday at 01:48 AM Interesting find. Series 1 or series 2 engine? Share this post Link to post Share on other sites
kpinnc 17,280 #3 Posted Tuesday at 02:07 AM 1 hour ago, Bert said: I found this one on marketplace for $150. I think you did well for what it is. Just about everything here in NC looks worse and folks think Wheel Horse means platinum lined. 3 Share this post Link to post Share on other sites
Thor27 851 #4 Posted Tuesday at 02:20 AM Good bones, that's a nice start. When you get ready for a seat pan look up @Adams94 1 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,528 #5 Posted Tuesday at 02:54 AM The Super C. Another favorite. Nice grab. 1 Share this post Link to post Share on other sites
Bert 778 #6 Posted Tuesday at 08:25 AM 6 hours ago, 8ntruck said: Interesting find. Series 1 or series 2 engine? It’s a series 1 19hp, I’d say original. 6 hours ago, kpinnc said: I think you did well for what it is. Just about everything here in NC looks worse and folks think Wheel Horse means platinum lined. thanks, I agree. 5 hours ago, Thor27 said: Good bones, that's a nice start. When you get ready for a seat pan look up @Adams94 I will definitely need a seat pan, I’ll look him up. Thanks for the replies. I should have mentioned when I shared the pics that this is going to be mostly restored and put back to work. I’ve got either a KT17 series 2 or a P220 onan that could be used. The series 1 is already out. Im also thinking of stretching a 520 gear reduction steering unit and adapting the greasable tie rods. 5 Share this post Link to post Share on other sites
ebinmaine 77,520 #7 Posted Tuesday at 08:38 AM 12 minutes ago, Bert said: this is going to be mostly restored and put back to work. I’ve got either a KT17 series 2 or a P220 onan that could be used. The series 1 is already out. Im also thinking of stretching a 520 gear reduction steering unit and adapting the greasable tie rods. A good catch with some interesting future plans. 1 Share this post Link to post Share on other sites
Retired Wrencher 6,477 #8 Posted Tuesday at 10:19 AM I hope you can find some good parts so it can be put back into service. Enjoy the project. 1 Share this post Link to post Share on other sites
953 nut 64,284 #9 Posted Tuesday at 01:32 PM Super C is a great find and should be a great project. as you go through the process of bringing it back to life. 3 Share this post Link to post Share on other sites
Bert 778 #10 Posted 11 hours ago On 3/10/2026 at 9:32 AM, 953 nut said: Super C is a great find and should be a great project. as you go through the process of bringing it back to life. Yes sir I’ll have plenty of pics. I’ll probably start a proper restoration thread but heres three of the Onan under the hood. It can sit further forward then the KT19. 2 Share this post Link to post Share on other sites
