Chav88 42 #26 Posted October 12 7 hours ago, 953 nut said: Welcome back. I can't see any reason that the mounting hardware from your mower couldn't be transplanted to a newer deck from a 300 or 400 series. Their mounting looks extremely similar, there are a couple of "D" adaptors shown but you already have them. This is helpful. I’ve come across a couple that looked very similar but the tag suggested they were not a match so I wasn’t sure. 1 Share this post Link to post Share on other sites
Chav88 42 #27 Posted 1 hour ago (edited) Thought to my self, I need to mow one more time then I will switch over to the snow blower. Barely made it through mowing because the d160 started running really bad. Seemed to correlate to sudden speed changes and I could smell raw fuel. I believe there is dirt in the float needle causing the bowl to over fill. It seemed like if I stopped and let it run wide open it would recover but at idle it would start to temple after a minute or 2. Tired to pull the carb apart and the gasket fell apart so I grabbed some from eBay. Says genuine parts. I sure hope so but I was having a hard time sourcing the gaskets anywhere. I might trace these ones and try to fit my own. Any who, I’ve had to blow out my air filter 4 times this summer due to dust. I want to try to find a pre filter cover I can oil to help protect the main filter. Not sure if anyone has tried that before. We had a lot of rain this year but my soil is very loamy and if it’s not wet it’s dust. Also I have reached out to several people inquiring about decks. I’m hoping one of the deals goes through. Seems like wheelhorseparts and more isn’t working. I was hoping they had the attachment for the snow blower. Edited 1 hour ago by Chav88 1 Share this post Link to post Share on other sites
