2026 Big Show Buy/Sell/Trade Thread

[Blaine 56]

 I’ll be looking for everything needed to convert my K301 from breakerless to points ignition. 

Points push rod plunger 

Original Kohler Part Number: 47 411 04-S (often replacing earlier 47 411 01-S or 47 411 01versions)

0.184 " in diameter and 1.550 " in length according to AI search

 

Coil

Plug wire

Points

Cover and gasket w/screws

Condenser

Or possibly a good trigger module 

[squonk 46,986]

20 minutes ago, Blaine said:

 I’ll be looking for everything needed to convert my K301 from breakerless to points ignition. 

Points push rod plunger 

Original Kohler Part Number: 47 411 04-S (often replacing earlier 47 411 01-S or 47 411 01versions)

0.184 " in diameter and 1.550 " in length according to AI search

 

Coil

Plug wire

Points

Cover and gasket w/screws

Condenser

Or possibly a good trigger module 

I can make you a brand new coil wire and have a coil 

Edited 12 hours ago by squonk

[Blaine 56]

19 minutes ago, squonk said:

I can make you a brand new coil wire and have a coil 

Thank you. That’s 2 items off the list. 

[Ed Kennell 46,284]

1 hour ago, Blaine said:

Cover and gasket w/screws

Condenser

Check the buckets.

[702854boy 825]

Does anyone know if that guy that makes the chrome stacks is going to the show?

[Blaine 56]

1 minute ago, Ed Kennell said:

Check the buckets.

 Thanks Ed. Sounds like I’ll need to bring an empty bucket or two to fill up. 

[WHX?? 57,001]

6 minutes ago, 702854boy said:

guy that makes the chrome stacks

If  your talking about Jim Kemp @jimkemp I don't think he does but I bet he would be happy to send you one. 

[702854boy 825]

23 minutes ago, WHX?? said:

If  your talking about Jim Kemp @jimkemp I don't think he does but I bet he would be happy to send you one. 

Yes, thats the guy I was thinking about, I thought his name was Jim Kemp but I didn't remember for sure and I didn't know what his tag here was, thank you

[Bow_Extreme 582]

Is anyone bringing a decent single stage tall chute blower to the show that they want to sell?  Thank you!

[Mike'sHorseBarn 3,566]

58 minutes ago, 702854boy said:

Does anyone know if that guy that makes the chrome stacks is going to the show?

 

Chad Burris will be at the show with his stacks and he makes nice ones as well.

[WHX?? 57,001]

1 hour ago, 702854boy said:

chrome stacks is going to the show?

I have one I be willing to sell. PM you pics and price. 

[EthanL 5]

I am looking for a new seat for my tractor. The mounts are already custom so bolt pattern doesn’t really matter. Arm rests would be great but definitely not required. 

[WHX?? 57,001]

39 minutes ago, EthanL said:

new seat for my tractor.

@76c12091520h usually has some. 

[squonk 46,986]

1 hour ago, WHX?? said:

@76c12091520h usually has some. 

Those seats are excellent, I'm planning on getting another! 

 

[evanloock 263]

Will be bringing some 1130 pawl springs to the show for the 1955-early 1957 RJ-35 tractors (later 1957 tractors used a different system without the springs).  I bought all that Newby's Implement Supply had left back when they were still around.  This is the small spring that goes into the pawl that engages/disengages the pawl from the inside of the hub to allow one wheel to freewheel during a turn using the small dimples case into the hub mounting area.  (see pic).  These are too small to leave out on a table.  Come see me if you want a set of 2 springs for $25 (tractor takes 2 springs; one for each side).   

Edited 3 hours ago by evanloock

[cafoose 3,739]

1 hour ago, squonk said:

2 hours ago, WHX?? said:

@76c12091520h usually has some. 

Those seats are excellent, I'm planning on getting another! 

 

[702854boy 825]

For Sale: Silvery Wheel Horse rims and 22 7.50 12 tires. Tires hold air and have tons of tread left. 10 bucks