WHX?? 54,836 #1 Posted yesterday at 10:59 PM Had The Pullstart pick me one at the BS couple years ago. Went to install it on a 8 HP and could not get it to quit rubbing. No wonder they are not all the same size. The ones with the three indents are larger than ones without. Especially on the SG end. Smaller ones are for a 7 HP????? Share this post Link to post Share on other sites
wallfish 19,230 #2 Posted yesterday at 11:08 PM Hmmm. I've never really noticed that either but all the 7s I've had were pull starts. Maybe go with a 30" belt instead of a 31.5" 1 Share this post Link to post Share on other sites
WHX?? 54,836 #3 Posted 23 hours ago 41 minutes ago, wallfish said: go with a 30" belt Thought of that too but was in githerdone so robbed from peter to pay paul. 2nd pic it looks bigger but it's not just the pic. Spent a hour of my life trying to get it to fit. There's an hour I won't get back. Share this post Link to post Share on other sites
wallfish 19,230 #4 Posted 23 hours ago 19 minutes ago, WHX?? said: Spent a hour of my life trying to get it to fit. There's an hour I won't get back All perspective. There's an hour you learned something too. Learning what not to do is just as important as learning what to do. It ain't gonna take you an hour the next time! 4 Share this post Link to post Share on other sites
WHX?? 54,836 #5 Posted 23 hours ago 1 minute ago, wallfish said: There's an hour you learned something too. Yah ... learned to not let Kev do my shopping ... 6 Share this post Link to post Share on other sites
Mike'sHorseBarn 3,417 #6 Posted 22 hours ago This is something I didn't know! Share this post Link to post Share on other sites
ri702bill 11,230 #7 Posted 13 hours ago AND there are a couple more variants... The 701 double-pulley belt guard, and the 702 style - similar to the one without the ribs, but has a much smaller dimple at the small end, not a full circle... 1 Share this post Link to post Share on other sites
Racinbob 12,744 #8 Posted 12 hours ago This is the 7hp I replaced the 8hp on my 854. It was a yank start so I put all the goodies from the 8 on to the 7 from the flywheel out to convert to s/g. If it's the grass screen rubbing could it be that it is a different screen? Note how the shroud is fully outside of the screen. 2 Share this post Link to post Share on other sites
squonk 45,450 #9 Posted 12 hours ago 12 hours ago, WHX?? said: Had The Pullstart pick me one at the BS couple years ago. Went to install it on a 8 HP and could not get it to quit rubbing. No wonder they are not all the same size. The ones with the three indents are larger than ones without. Especially on the SG end. Smaller ones are for a 7 HP????? 2 different Gen pulleys? Remember I have a 7 and 8 on the bench with the 2 pulleys and that may be the difference? 1 Share this post Link to post Share on other sites
WHX?? 54,836 #10 Posted 8 hours ago 4 hours ago, squonk said: 2 different Gen pulleys? Would stand to reason the smaller guard would have a smaller pulley. Might matter if it was the short or long SG? 1 Share this post Link to post Share on other sites
squonk 45,450 #11 Posted 7 hours ago 2 small blocks on the bench. Closest one is an 8. Had the larger guard with the 3 lines. 3" pulley. Farther one is a 7. Came with no guard. 3 1/8" pulley. 1 Share this post Link to post Share on other sites
Chris G 3,369 #12 Posted 5 hours ago I can double check but I do believe those are actually listed with different part number, In the Kohler engine books i have Share this post Link to post Share on other sites
