Jump to content
tallen4392

charger 12 battery

Recommended Posts

tallen4392

anyone ever use those mighty max gel battery’s they sell on amazon looking for the right size battery for my my charger 12   i went to napa and 4 other parts stores near me no one has it also went to tsc no good there either the tray is 9 long x 5.5 wide i think 9 inches tall.. Thanks

Share this post


Link to post
Share on other sites
 
ebinmaine

What type of cable ends do you have? 

 

A good strong  standard issue  U1 battery will work fine. 

  • Like 4

Share this post


Link to post
Share on other sites
 
 
kpinnc
5 hours ago, tallen4392 said:

anyone ever use those mighty max gel battery’s they sell on amazon

 

Yes. I have two of them. Model YTZ14S. One on a K181 and another on a Vanguard 14. Used one on the Bronco with a K321 for a while too. I think they have as good or better cranking power than typical L&G batteries. Can't speak for longevity because I've only had them for 2 years but so far so good. 

 

Very nice when space is tight, but if using a standard WH battery box you'll need a block behind it. I prefer that anyway so that it doesn't get close to the drive belt. 

 

 

Screenshot_20260127_214351_Amazon Shopping.jpg

Edited by kpinnc
  • Like 1

Share this post


Link to post
Share on other sites
 
pfrederi

Most chargers came with a full sized battery and clamp type connectors.  This is a 22NF battery in Charger battery pan.

 

 

IMG_0024.JPG

  • Like 1

Share this post


Link to post
Share on other sites
 
markseven

Try this it will turn over every time 

For years. 

20251222_053640.jpg

  • Like 1

Share this post


Link to post
Share on other sites
 
tallen4392

thanks for the pic of the 22nf  that’s what i need should be able to find those 

Share this post


Link to post
Share on other sites
 
ebinmaine
40 minutes ago, tallen4392 said:

thanks for the pic of the 22nf  that’s what i need should be able to find those 

 

@tallen4392    if those aren't readily available you can also use a group 35. They have 35R as well so double check your own terminal setup.  

 

35/35R will need a small spacer block set in the battery tray.  

 

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...