23 Reo 234 #1 Posted yesterday at 09:23 PM What is the Wheel Horse part number for the mower to deck drive belt on a 520H with a48" deck? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,931 #2 Posted 22 hours ago Click on the fuzzy picture 1 Share this post Link to post Share on other sites
Lee1977 7,517 #3 Posted 21 hours ago Mule drive belt no.102742 super seeded to no. 94-2501 ( 1/2" x 103" ) 48" deck belt no. 1594 ( 1/2" x 107" ) 1 1 Share this post Link to post Share on other sites
peter lena 9,647 #4 Posted 9 hours ago @23 Reo how easily do related , pulleys move ? often refer to mule drive pto belt moving by hand easily to deck set up . very typically those bearings fail , frayed belts will show / tell you that . incremental lubrication failure CAUSES BELT BOUNCE ,AND MUEL DRIVE SQUEAING FAILURE . more than most want to deal with , but related bearing , clean out , and hi temp / stress , 550 deg flash point , polyurea grease , all of mine done years ago , no failures . watch for wear on that new belt , fraying / scuffing , it will show you the way , pete 1 Share this post Link to post Share on other sites
23 Reo 234 #5 Posted 5 hours ago Thank you, I ordered a Toro brand belt today. Only $29.00 delivered, Victory! 1 Share this post Link to post Share on other sites
.thumb.jpg.e027905726836f41d35a27e60c2cb4f9.jpg)