dandan111 60 #1 Posted January 11 My snow blade has been bent and straitened so many times I’m going to get another. I found a toro zero turn blade like new. It looks like the same blade only black instead of red? Will this mount right on my plow frame? I don’t do sidewalks as much anymore so I’m probably going to set it so it trips easier. Maybe that will save the new one from bending. thanks 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,948 #2 Posted January 11 A good imagination and a welder will make anything fit. Have a model number of the Toro blade so we can compare parts lists? 1 Share this post Link to post Share on other sites
dandan111 60 #3 Posted January 11 I don’t have numbers 1 2 Share this post Link to post Share on other sites
dandan111 60 #4 Posted January 11 It’s a 48 inch blade. Looks to have never been used Share this post Link to post Share on other sites
ri702bill 11,074 #5 Posted January 11 9 minutes ago, gwest_ca said: A good imagination and a welder will make anything fit. Even a poor imagination teamed up with a torch & welder can do about the same!! 1 Share this post Link to post Share on other sites
SylvanLakeWH 30,339 #6 Posted January 11 28 minutes ago, ri702bill said: Even a poor imagination teamed up with a torch & welder can do about the same!! Good wisdom there... 2 Share this post Link to post Share on other sites
WHX?? 54,106 #7 Posted January 11 36 minutes ago, ri702bill said: Even a poor imagination teamed up with a torch & welder & a BFH Ya know we really shouldn't talk about Wallfish like that in front of him ... 6 Share this post Link to post Share on other sites
sqrlgtr 2,033 #8 Posted January 11 Looks like a pretty straightforward swap to me 1 Share this post Link to post Share on other sites
dandan111 60 #9 Posted January 11 Thanks. I hope so Share this post Link to post Share on other sites
peter lena 9,665 #10 Posted January 12 @dandan111 that swing quadrant OPPORTUNITY is glairing to me , and too often over looked , heim joints , and frame lever swing mount , are key to smooth easy swing areas . this the time to build this in . pete Share this post Link to post Share on other sites
dandan111 60 #11 Posted January 13 (edited) Black blade fits perfect. Looks brand new factory. Probably spent time outside as there’s no decals.. I’m wondering if it was at the end of the garden tractors and they marketed these black for the ztr? I’m happy. Setting it light. Tripping will annoy me but it won’t bend it. Edited January 13 by dandan111 Typo 2 1 Share this post Link to post Share on other sites
