dandan111 51 #1 Posted Sunday at 10:09 PM My snow blade has been bent and straitened so many times I’m going to get another. I found a toro zero turn blade like new. It looks like the same blade only black instead of red? Will this mount right on my plow frame? I don’t do sidewalks as much anymore so I’m probably going to set it so it trips easier. Maybe that will save the new one from bending. thanks 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,920 #2 Posted Sunday at 10:18 PM A good imagination and a welder will make anything fit. Have a model number of the Toro blade so we can compare parts lists? 1 Share this post Link to post Share on other sites
dandan111 51 #3 Posted Sunday at 10:28 PM I don’t have numbers 1 2 Share this post Link to post Share on other sites
dandan111 51 #4 Posted Sunday at 10:29 PM It’s a 48 inch blade. Looks to have never been used Share this post Link to post Share on other sites
ri702bill 10,973 #5 Posted Sunday at 10:29 PM 9 minutes ago, gwest_ca said: A good imagination and a welder will make anything fit. Even a poor imagination teamed up with a torch & welder can do about the same!! 1 Share this post Link to post Share on other sites
SylvanLakeWH 30,167 #6 Posted Sunday at 10:58 PM 28 minutes ago, ri702bill said: Even a poor imagination teamed up with a torch & welder can do about the same!! Good wisdom there... 2 Share this post Link to post Share on other sites
WHX?? 53,757 #7 Posted Sunday at 11:08 PM 36 minutes ago, ri702bill said: Even a poor imagination teamed up with a torch & welder & a BFH Ya know we really shouldn't talk about Wallfish like that in front of him ... 6 Share this post Link to post Share on other sites
sqrlgtr 1,794 #8 Posted Sunday at 11:19 PM Looks like a pretty straightforward swap to me 1 Share this post Link to post Share on other sites
dandan111 51 #9 Posted Sunday at 11:30 PM Thanks. I hope so Share this post Link to post Share on other sites
peter lena 9,643 #10 Posted Monday at 12:49 PM @dandan111 that swing quadrant OPPORTUNITY is glairing to me , and too often over looked , heim joints , and frame lever swing mount , are key to smooth easy swing areas . this the time to build this in . pete Share this post Link to post Share on other sites
dandan111 51 #11 Posted 6 hours ago (edited) Black blade fits perfect. Looks brand new factory. Probably spent time outside as there’s no decals.. I’m wondering if it was at the end of the garden tractors and they marketed these black for the ztr? I’m happy. Setting it light. Tripping will annoy me but it won’t bend it. Edited 6 hours ago by dandan111 Typo 1 1 Share this post Link to post Share on other sites
