Achto 30,884 #151 Posted Saturday at 11:09 PM Happy Valentine's Day !! Being as such, it seemed like a good day to spray some red paint. The outside temp in the low 50's also made the shop easy to heat. A big THANK YOU to Jim for helping me wet sand this morning. 2 7 Share this post Link to post Share on other sites
WHX?? 54,619 #152 Posted yesterday at 12:48 AM 1 hour ago, Achto said: THANK YOU to Jim What the hell it's tradition now! I didn't do a damn thing. Looks like them hood hangers worked purty good. Thank you for the P clamps ... ended all my misery. I got nice ... well decent ... throttle range without having to add that little tab. 6 Share this post Link to post Share on other sites
Achto 30,884 #153 Posted 5 hours ago Some assembly today. No, not on the tractor. I put together the plow that I painted a few weeks ago. Normally I spread grease on the shiny portions of my plows for storage. This plow I plan to display with the tractor this year so I really don't want do deal with a plow full of grease when I'm handling and transporting it around. So instead of grease I choose to spray the shiny portions with Till-Guard. This paint is designed to protect the polished surface and to scour off when the plow is put back in use. One up front warning - this stuff really thin and runs very easily. Very thin coats or spray like normal paint and wait for your runs to reach the bottom of the share & let them drip off. Question time - Can anyone tell me if this is actually a plow?. Reason that I ask is because in the pictures that I find the plows have a turn buckle to adjust pitch. This one has an L bolt with 2 nuts on the adjuster. 2 Share this post Link to post Share on other sites
Easton Rich 890 #154 Posted 5 hours ago It doesn't look like it. The board is original, but someone built the frame it looks like. I could be wrong Share this post Link to post Share on other sites
WHX?? 54,619 #155 Posted 2 hours ago (edited) Nice I guess someone isn't gettin that back. Well serves him right he shoulnd't a left it here. Where is that Brinly stamp? I prolly didn'see it for covered in rust. It was yard art here for a year or three. I think I did use it once and always dug the shape of the share. Thoughts on spray clear on it instead? For that display shine? If you want Dan I can clean the coulter up for your display. I really shouldn't be using this one for yard art it's too cool. Only paint I guess. The one I got from @stevasaurus years ago. Maybe he can shed some light on it. And if it had the decal on it before he restored it. Looks to be the same plow except for the sharp instead of rounded corner on the back of the share. Edited 2 hours ago by WHX?? Share this post Link to post Share on other sites
Easton Rich 890 #156 Posted 2 hours ago 1 minute ago, WHX?? said: Nice I guess someone isn't gettin that back. Well serves him right he shoulnd't a left it here. Where is that Brinly stamp? I prolly didn'see it for covered in rust. It was yard art here for a year or three. I thnk I did use it once and always dug the shape of the share. Thoughts on spray clear on it instead? For that display shine? The one I got from @stevasaurus years ago. Maybe he can shed some light on it. And if it had the decal on it before he restored it. Looks to be the same plow except for the sharp corner on the back of the share. Hmm am I sensing someone is committing some WH thievery? Share this post Link to post Share on other sites
WHX?? 54,619 #157 Posted 2 hours ago (edited) 8 minutes ago, Easton Rich said: Hmm am I sensing someone is committing some WH thievery? Yep I absconded it from my stepson where things go to die. It wouda rusted away to nothin at his place. Now look at it's glory. Edited 2 hours ago by WHX?? Share this post Link to post Share on other sites
Easton Rich 890 #158 Posted 2 hours ago Ahhhh good save! Share this post Link to post Share on other sites
