TonyToro Jr. 2,193 #1 Posted 4 hours ago (edited) Mods if I didn’t put this in the right section feel free to move it. Good afternoon everybody. 2 snowstorms ago I started to see a was small wet spot under my C-145 after plowing. Didn’t think much of it. Got through this past storm yesterday and came out this morning to a big wet spot and still leaking. The problem is underneath the valve body. It isn’t any of the hydraulic lines. But may be some of the fitting. I’ve done some research and they do have o-rings that seal them. I am thinking that may be the problem. Let me know what you guys think and how hard it is to replace those. Sorry for not the best picture I’ll try and get better ones tommorow. Thanks in advance! Edited 4 hours ago by TonyToro Jr. Share this post Link to post Share on other sites
c-series don 10,848 #2 Posted 3 hours ago First thing I would do is clean that whole area, then clean it again. Then you can pinpoint where it’s leaking from, but seeing up in there kinda sucks. I can’t remember if they’re O- ring style fittings or not. 1 Share this post Link to post Share on other sites
