Only angle plow one direction

[ANTPER 213]

Hello. Mounted a plow to a Hydro 518. It will only angle with the lever to my right. It wont angle to left as the angle lever hits foot peg without enough room yo travel. What am I missing? Foot pegs longer on 518 on right? This plow is not original to this 518.TIA

Anthony

[edgcooper 17]

Heat and bend control lever to increase distance to foot rest.

[8ntruck 8,385]

Or maybe plow from the other direction.  

[gwest_ca-(File Mod) 11,874]

The lever is symmetrical so you can turn it around. Would that help?

[SylvanLakeWH 29,966]

I have had to bend a couple handles over the years depending on the plow, handle and tractor...

[ANTPER 213]

2 hours ago, edgcooper said:

Heat and bend control lever to increase distance to foot rest.

Was considering cutting a small slot end of foot peg for extra arm swing.

[Ed Kennell 43,881]

I have had to turn some levers around, bend some, and put spacers in some to clear foot rests and foot pedals.

 

[peter lena 9,583]

@ANTPER    have to se your set up  , but  plows require  a detailed set up , makes me wonder about your  plow quadrant set up , agree with @Ed Kennell  on possibilities , amazing difference  when set up  correctly  , pete 

[953 nut 63,220]

I do about 90% of my snow plowing to the right, go down, turn around and come back up, repeat, repeat, then turn it back to the mid position to tidy up the turn around area.

[ANTPER 213]

5 hours ago, gwest_ca said:

The lever is symmetrical so you can turn it around. Would that help?

My Man you were right on the money. Yea I flipped handle 180 and works perfect. Thanks very much. 

[ANTPER 213]

Thanks everyone for your input!

 

Anthony