Domenic 13 #1 Posted December 19, 2025 I split the case on my c175 because it started knocking and when I took the crank shaft out I noticed that the bolts holding the connecting rod onto the crank shaft were both lose. Ive been looking to buy a new piston rod and rod cap but cant seem to find one anywhere. If anyone knows where I can get one please let me know. 1 Share this post Link to post Share on other sites
Achto 30,435 #2 Posted December 19, 2025 (edited) 1 hour ago, Domenic said: Ive been looking to buy a new piston rod and rod cap but cant seem to find one anywhere Found some complete rebuild kits. https://www.ebay.com/itm/185525360554 Edited December 19, 2025 by Achto 2 Share this post Link to post Share on other sites
pfrederi 19,459 #3 Posted December 19, 2025 Parts are getting hard to find for KTs. Especially over/under. Pats small engine seem to have rods 1 Share this post Link to post Share on other sites
953 nut 63,546 #4 Posted December 19, 2025 You should have the cylinder jugs and crank measured at a machine shop to see what needs to be done before buying any parts. No need to spend a lot of money on rods, rings and gaskets only to find out that the engine has other problems. 3 2 Share this post Link to post Share on other sites
Blasterdad 3,146 #5 Posted December 19, 2025 A little far away from you but... 1 Share this post Link to post Share on other sites
Tim's Toy Tractor 12 #6 Posted December 20, 2025 Blasterdad, I know you are couple of ours away, but it is a heck of a deal for (4) KT17's, the one long block has extremely low hours on it, I actually drove to New York years ago to pick that one up. I am a little negotiable, just cleaning out my garage. Fell fre to call me anytime @ 1-313-460-8858, Tim 1 Share this post Link to post Share on other sites
Blasterdad 3,146 #7 Posted December 20, 2025 2 hours ago, Tim's Toy Tractor said: Blasterdad, I know you are couple of ours away, but it is a heck of a deal for (4) KT17's, the one long block has extremely low hours on it, I actually drove to New York years ago to pick that one up. I am a little negotiable, just cleaning out my garage. @Tim's Toy Tractor I reposted your classified for @Domenic who's looking for parts for his KT17. He's in Connecticut... Share this post Link to post Share on other sites
Domenic 13 #8 Posted December 20, 2025 5 hours ago, Blasterdad said: @Tim's Toy Tractor I reposted your classified for @Domenic who's looking for parts for his KT17. He's in Connecticut... I might have to check that out if I cant find the parts for mine. 1 Share this post Link to post Share on other sites
