Bad Boy, the Wheel Horse of the Future?

[JoeM 9,116]

After having a couple Bad Boy machines in the shop, I started looking around at their other products. Pretty well built and simple. 

Mostly American made. I really did not know how big this company has grown. I just assumed they were in the TSC stores etc. 

At the end of the vid is a machine that is a hybrid. Runs on battery but has an on board charging engine and generator. 

I suppose the purpose is to allow the battery to be charged if you get near the end of a cycle of mowing and have to finish. Or maybe if you are a lawn care pro the ability to charge the battery when moving between jobs? 

I was just trying to logic the setup. I know now a days some communities like to limit noise, Hency battery mowers? IDK 

 

[WHX?? 53,114]

What blows me away is the multitude of OEM's that are making this kind of stuff now. Stihl for example ... their stuff is incredible and they are somewhat newcomers to the z turn market. I forget which brand it is but they have one out that "remembers" your lawn and drives automatically. JD maybe? with technology from their auto combines? All the operator has to do is sit in the seat and drink a beer! Yes and then there is the EV/hybrid crap... mind boggling. 

Then there's Scag, Dixie, Grasshopper, Exmark, Husky ...  list is endless. 

Edited 4 hours ago by WHX??
speeling

[ri702bill 10,437]

44 minutes ago, WHX?? said:

they have one out that "remembers" your lawn and drives automatically. JD maybe

Most likely They have had autonomous GPS guided Combines for about 2 decades now. When I worked at Stoneridge, we made the steering angle sensors to feedback info to the guided steering control. Almost made axle torque sensors to detect axle twist and failure. Way too costly and not field repair friendly. That was a "No-Go".

[Handy Don 14,989]

The “onboard generator” design is for the reasons you mentioned, range extension and “offline” charging, but also for mechanical simplicity and flexibility

Only one drive mechanism (electric).

Battery charge control electronics are already onboard and wired to the batteries so only a power source is needed.

Generator can be positioned where convenient and simply wired in.

Generator always runs at an efficient optimal speed (and only when the operator chooses)

Motor-generator pair can be sized to match desired charging rate or even to provide “burst” power

 

Railroad locomotives have long used the motor-generator system, though without batteries, for the flexibility and control of power delivery as well as for efficiency. Diesel submarines with batteries have too.

[Handy Don 14,989]

6 minutes ago, ri702bill said:

Most likely They have had autonomous GPS guided Combines for about 2 decades now. When I worked at Stoneridge, we made the steering angle sensors to feedback info to the guided steering control. Almost made axle torque sensors to detect axle twist and failure. Way too costly and not field repair friendly. That was a "No-Go".

Standard GPS alone doesn’t have sufficient precision to guide a lawn mower (or even a combine!) so they supplement it with a real-time motion-tracking system (often referred to as RTK or real-time kinematics) that tracks actual direction and distance using electro-mechanical sensors on the machine (as @ri702bill noted). 

Similar technology in self-guided home floor cleaners. 

One weakness is that wheel slippage can frustrate them!

Edited 3 hours ago by Handy Don

[Racinbob 12,357]

I've been looking at some zero turns. Several things keep me coming back to the Bad Boy R series. I haven't seen another one with a deck that heavy.

All I've seen at TSC are the residential models. Still pretty impressive.

Edited 2 hours ago by Racinbob

[Gasaholic 337]

Yeah Id love to see some actual feedback from real users that have a TSC bad boy mower as far as durability and ruggedness... I've been considering getting a new mower in zero turn format but all the usual crap I used to see in my repair shop - Consumer crap from Husqvarna and MTD models all had just too many durability problems - stuff breaks too easy..  So I would want something on a par with ExMark, Hustler, Scag, Bunton and the like - commercial duty but at a consumer level price point - not about to blow 10 grand on a mower , but I could see 3-4 grand on a tough built Pro-Grade Consumer model... Fabricated decks are typically pretty robust but there's other stuff too - frame construction (welds, cracks, etc) steering (HOw many wear points they have - and adjustability/maintenance of same - Ive seen a lot of those that invariably ended up with steering problems after a few years of use with linkages and crap wearing out pinned linkage holes oblong, etc.) 

[ri702bill 10,437]

10 minutes ago, Gasaholic said:

HOw many wear points they have - and adjustability/maintenance of same

I'd look at  a model that has been on the market, design unchanged, for a few years. Long enough to have gained a track record and a reputation - either good or bad... ( look at the long run Ariens had on their 6 HP 24" SnoThros - more than a decade) Hopefully you find a clear cut winner...