Handy Don 14,974 #26 Posted Tuesday at 05:57 PM 2 hours ago, Stan50 said: except just one small bolt sleeve/spacer in the lift assembly, but this is not real problem. Welcome to the Forum Those spacers are essential for maintaining proper alignment of the lift mechanism. Look into replacing it! 2 Share this post Link to post Share on other sites
Stan50 27 #27 Posted Tuesday at 07:12 PM yes,sir! I meant - "not real problem" = I'm going to get or fabricate mentioned spacer 2 2 Share this post Link to post Share on other sites
ebinmaine 75,333 #28 Posted Tuesday at 11:08 PM 3 hours ago, Stan50 said: yes,sir! I meant - "not real problem" = I'm going to get or fabricate mentioned spacer One of the great things about Redsquare is our Vendors Section. @76c12091520h is the handle for Brian Badman. Excellent guy. Over the years Wheelhorse company used many "Standard Parts". Many of the bearings, seals, fasteners etc are easily accessed from places like McMaster Carr or Bolt Depot. 1 Share this post Link to post Share on other sites
Stan50 27 #29 Posted Wednesday at 07:57 AM I'm gonna gather up some parts here in Poland. Although I was in US many times, next time I'll be there for parts . I lived in Canada many years, but never seen one WH. I have some friends in US, eventually when I buy something online they'll help with shipping .. 1 2 Share this post Link to post Share on other sites
Stan50 27 #30 Posted 2 hours ago (edited) On 11/30/2025 at 3:38 PM, Stan50 said: Throttle works properly but yes, I definitely look forward to it I just examined Manual for 1985 312-8 with K301S engine, looks like this throttle cable setup on engine cover is correct,good for me . Above this "1 screw high level setup" for throttle cable is bracket for choke cable. Edited 2 hours ago by Stan50 1 Share this post Link to post Share on other sites
