What is this tool?

[ebinmaine 74,802]

This was with a bench grinder we just got from an auction.

It has 4 separate "gear" rollers? that move independently of one another. 

 

A stone dressing tool of some sort?

 

 

 

 

 

[Bar Nuthin 1,569]

That's a dressing tool for your grinding wheels. To true up the face of the stone.

Best if you have a solid guide you can rest against to stay flat with the face of the stone.

Edited Tuesday at 09:18 PM by Bar Nuthin

[Ed Kennell 43,261]

     I have better results using the single diamond point dresser.   Working the stop against the grinder work rest.

 

 

 

[ebinmaine 74,802]

2 hours ago, Bar Nuthin said:

solid guide you can rest against

 

Here's the machine. 

Two solid guides. Two different stones at two different angles. 

 

 

 

 

 

1 hour ago, Ed Kennell said:

I have better results using the single diamond point dresser.   Working the stop against the grinder work rest.

 

 

I have a couple much smaller dressing tools made from square stock coated with diamond grit. 

Never used a round ended one.  

 

 

[formariz 12,298]

Curiously I never liked using either type. I use and have great results using an old used diamond cutting saw blade. I find it easier to control  and more versatile being able to use the very tip or the sides. Easier to control with faster results. 

Edited Tuesday at 11:50 PM by formariz

[ri702bill 10,180]

Similar to the one I have... I did have to disassemble it to add a washer spacer at one end of the stack to limit the amount of "wander" the wheels had. That improved the wheel finish.

I thought for a minute that the wheel on the right of your grinder was green, not gray. Green is for dressing carbide - and that wheel is expensive...

[JoeM 9,006]

Not much for stone wheels, installed a 6 inch flap disc. It self levels. 

I really have no need to sharpen tooling tho. About once a year I can reinstall a wheel and do the saved up bits etc, and have a session. 

[ebinmaine 74,802]

39 minutes ago, JoeM said:

Not much for stone wheels, installed a 6 inch flap disc. It self levels. 

I really have no need to sharpen tooling tho. About once a year I can reinstall a wheel and do the saved up bits etc, and have a session. 

 

Interesting thought. 

I could do that too.  

 

What grit wheel do you use? 

[lynnmor 8,122]

Your wheel dresser may need new star wheels.  This type of dresser works well if you are grinding things that quickly load up the wheel, they quickly clean and true the wheel but the dust can be incredible.

[ri702bill 10,180]

22 minutes ago, ebinmaine said:

 

Interesting thought. 

I could do that too.  

 

What grit wheel do you use? 

The one slightly less abrasive than the temperament of an ex-wife!! 

Edited 12 hours ago by ri702bill

[ri702bill 10,180]

Your wheel dresser may need new star wheels...

Yup. Those wheels wear as does the stone wheel.

[ebinmaine 74,802]

1 minute ago, ri702bill said:

The one slightly lass abrasive than the temperament of an ex-wife!! 

 

So like a grit of. ... 14?

 

 

[ri702bill 10,180]

3 minutes ago, ebinmaine said:

So like a grit of. ... 14?

Nope - coarser than that!!

[JoeM 9,006]

I have an 80 on it now but 40 is best for what I do. Got to check to see if the wheel comes with spacer bushings to fit the grinder shaft, I had a set from before and can't remember is these came with or without. 

[8ntruck 8,215]

Check to make sure you are not going to exceed the max rpm on the flap wheel.  'Ring' your stone wheels before mounting to confirm they are not cracked.

[ebinmaine 74,802]

7 hours ago, JoeM said:

best for what I do.

 

What's your average usage for a bench grinder?

 

[JoeM 9,006]

26 minutes ago, ebinmaine said:

What's your average usage for a bench grinder?

I debur metal stuff, edges, holes etc. the flap works real nice for sharping axes, mower blades too. I did use it some on small parts to take off some paint along with a wire wheel on the other side of the grinder. Kind of the clean up center. 

[ebinmaine 74,802]

25 minutes ago, JoeM said:

I debur metal stuff, edges, holes etc. the flap works real nice for sharping axes, mower blades too. I did use it some on small parts to take off some paint along with a wire wheel on the other side of the grinder. Kind of the clean up center. 

 

Pretty much identical to our usage here.  

 

Definitely a worthwhile looksee into the flapper for me.  

[MainelyWheelhorse 2,123]

@ebinmaine I’d put a wire wheel on one side. I’ve used my father’s more times than I can count to clean up bolts, parts and to de paint parts. It really comes in handy

[SylvanLakeWH 29,421]

13 minutes ago, MainelyWheelhorse said:

@ebinmaine I’d put a wire wheel on one side. I’ve used my father’s more times than I can count to clean up bolts, parts and to de paint parts. It really comes in handy

[ebinmaine 74,802]

24 minutes ago, MainelyWheelhorse said:

@ebinmaine I’d put a wire wheel on one side. I’ve used my father’s more times than I can count to clean up bolts, parts and to de paint parts. It really comes in handy

 

10 minutes ago, SylvanLakeWH said:

 

 

Oh I have a couple already.  

 

I may have a bench grinder hoarding problem too. 

 

This is number four. 

 

Four different sizes.  

 

 

[8ntruck 8,215]

Got to remember that wire wheels can grab a part out of whatever you were holding it with and throw it in into an orthogonal dimension never to be seen again quicker than you can believe

Edited 32 minutes ago by 8ntruck

[ebinmaine 74,802]

21 minutes ago, 8ntruck said:

Got to remember that wire wheels can grab a part out of whatever you were holding it with and throw it in into an orthogonal dimension never to be seen again quicker than you can believe

 

I've done this. 

And I've learned. 

 

And I've done it again and again.  

 

So obviously I've learned nothing. 

 

 

[wallfish 18,652]

19 minutes ago, 8ntruck said:

Got to remember that wire wheels can grab a part out of whatever you were holding it with and throw it in into an orthogonal dimension never to be seen again quicker than you can believe

I believe they go wherever those lost socks from the dryer go! Or, maybe with those little springs that are never seen again once they fly out. No one ever finds random socks or springs once they're lost.

[ebinmaine 74,802]

1 minute ago, wallfish said:

I believe they go wherever those lost socks from the dryer go! Or, maybe with those little springs that are never seen again once they fly out. No one ever finds random socks or springs once they're lost.

 

Or the little steel balls from the shifter forks.