Retired Wrencher 6,062 #1 Posted 21 hours ago I have a few Carter carburetors. And in the manual, the only thing I can find is the Walborough carbs. So is the setting the same for Kohler/Carter/ Walborough? So what I looking for is the Kohler and Carter settings. Thanks for any info on this. Share this post Link to post Share on other sites
Wishin4a416 2,224 #2 Posted 19 hours ago I start out at 2 turns out and they always start from there. You can then fine tune. 2 1 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,744 #3 Posted 19 hours ago I believe there is a page in this manual that addresses settings. This manual is best viewed from a printed version because some of the charts span 2 pages wide. When just viewing it it is hard to tell if you are looking at a left or right page. 3 1 Share this post Link to post Share on other sites
Achto 29,858 #4 Posted 17 hours ago 3 hours ago, Retired Wrencher said: So is the setting the same for Kohler/Carter/ Walborough? I don't own a Walbro carb on a Kohler that has an adjustment for the main jet. Time for some schooling for me. Share this post Link to post Share on other sites
Retired Wrencher 6,062 #5 Posted 14 hours ago (edited) 4 hours ago, gwest_ca said: I believe there is a page in this manual that addresses settings. This manual is best viewed from a printed version because some of the charts span 2 pages wide. When just viewing it it is hard to tell if you are looking at a left or right page. I have another Carb that has no name on it would that be a Kohler carb. I just never took the time to know who made what. I will take a picture of it tomorrow . Edited 14 hours ago by Retired Wrencher Share this post Link to post Share on other sites
tunahead72 2,581 #6 Posted 10 hours ago 8 hours ago, gwest_ca said: I believe there is a page in this manual that addresses settings... Yep, Section 2. That's a great reference! Share this post Link to post Share on other sites
Racinbob 12,237 #7 Posted 6 hours ago 10 hours ago, Achto said: I don't own a Walbro carb on a Kohler that has an adjustment for the main jet. Time for some schooling for me. They exist Dan. The first (and only) one I delt with was on the M14 314-H. Remember the thread I did about that thing giving me fits. Turned out it wasn't even fuel related. Share this post Link to post Share on other sites
Retired Wrencher 6,062 #8 Posted 5 hours ago (edited) 1 hour ago, Racinbob said: They exist Dan. The first (and only) one I delt with was on the M14 314-H. Remember the thread I did about that thing giving me fits. Turned out it wasn't even fuel related. That looks like the carb I have from Badman. This will be going on the 1057 when done. Thanks for the pick @Racinbob. It looks like brand new can send you a picture of it today. Edited 5 hours ago by Retired Wrencher Share this post Link to post Share on other sites
