Ultimate basket case Suburban 400 project

[meadowfield 2,796]

Not super rare, but equally they only surface once every six months and there’s a queue waiting to grab them!

I managed to acquire a suburban 400 from a young lad who bought it then realised he couldn’t do anything with it! 

Had a very large Briggs engine fitted, a VW Beetle steering box and too many hacks to mention.
 

 

he nabbed the narrow rears and left me with the rest! 
 

 

gearbox full to the brim with water!

 

 

Interesting stretch chassis to take a Briggs engine.

 

 

 

 

lots of chassis patching!

 

 

 

rolling.....
 

 

 

making a new hoodstand

 

 

 

 

steering gears - same size and ratio as the original - but will outlast them!

 

 

 

 

looking more like it

 

 

onto that gearbox

 

 

 

it was a mess, all the bearings were gone!

 

 

they had chopped the bottom of the casing for some reason

 

 

 

nearly together - amazon packaging to the rescue as a gasket  

 

 

 

done - with a modifed C series shifter

 

 

 

onto the brake drum - I turned down and old cast pulley.

 

 

reamed the inside to 3/4"

 

 

 

all done - just the pedal and linkage to sort....

 

 

Ewan very kindly fired up the forge and made me a pedal.

 

 

new brake/clutch pedal in place - I thought a bigger bush can't be a bad thing!

 

 

donor Clinton engine didn't spark - home made puller did a reasonable job. Points cleaned up and all connections clean - we were in action!

 

 

didn't have a pull start either - so made a start cup and used a new tecumseh pull start

 

 

 

 

 

finally made two footrests to match. Hard work in the press, but a modified bolster chisel did the job!

 

 

Finished - just needs the right steering wheel and hood!

 

 

Does anyone have something that could be shipped to the UK?

 

 

Edited 17 minutes ago by meadowfield

[oldlineman 1,576]

Very nice work and weld, looks like your right leg won't get cold 

[meadowfield 2,796]

1 minute ago, oldlineman said:

Very nice work and weld, looks like your right leg won't get cold 

 

thanks - longer pipe is on the way  

[Pullstart 67,438]

Those welds look better than robotic!  Awesome work!

[953 nut 61,081]

                                       

That is quite an impressive transformation,  nice work. 

[peter lena 9,356]

@meadowfield  terrific work on that , love the way you  just adapt to any situation , what   a concept !  stay at it ,good on you , pete ,   

[rjg854 12,384]

Very nice work on that tractor to save it