Pete has some competition!

[JoeM 8,961]

Seen this rust proofing stuff from Eastwood on the interweb, interesting. $30 a can ish. 

[adsm08 3,652]

Yup. Worked with a guy who used this when repairing uni-bodies. Swears by it.

[peter lena 9,479]

@JoeM  thanks for the shout ! been doing that  for a very long time , the newer  cars / trucks out there with  heavy solid rust , is scary , like the 2 stage  lubrication creep . lighter  penetrating oil  at / in  highest  body areas ,chain / cable spray  picture an oil creep down , thats the spread , and verifies  every seam , and boxed zone , then an over spray with  open / gear spray , that tracks over / into the boxed areas , showing  film , then full bottom  coating , never had any  peel off  or  rust , fender trim is solid , zero anything . another thing about lubricants , once they  seal off  , you are good , talking  years out , also wash my cars . all of my  door bottom seaming , is lubrication , tracked , full  length , my tractors  also have a lot of , attachment  related lube  experiments , think the  plow set up is just  so smooth / easy to use . run by quadrant spring . pto lever set up is  ridiculous , lubricants again take the lead . pete          

[squonk 44,684]