Jump to content
2003Chevy

ADDED Three at Once! (2x 854 1x 855)

By 2003Chevy, in Wheel Horse Tractors

Recommended Posts

2003Chevy    47

2003Chevy
Posted

Hello All!

 

Added THREE tractors all at once yesterday(09/16/2025).  Two model 854, and one model 855.  The two 854 look pretty nice, but are not running right this minute  --does not look like much more than a little tinkering/refreshing after sitting for a long time.  The 855 was labelled a "parts" tractor, but except for it being Really well-used looking, it seems to be all there so I am not going to consider it out of play yet.  The two 854's have rear discharge mower  decks...one is a square style deck, the other the rounded style deck.

 

I think it is really nice that all three are basically the same machine, separated by one year, yet completely different styles--the end of one era and the beginning of another I guess.

 

There is an ID tag on the 855 (serial number 135166) but on the two 854 tractors, there is No tag under the steering like late models.  Are the tags in a different place on older machines?  Looking them over, I do not notice anything obvious.  The 854 with the lower Kohler engine serial number has the round style mover deck, while the one with the slightly higher engine serial number has the square style deck.

 

All for now!  Be well and stay safe.

 

[rayg]

 

 

 

 

 

 

 

 

IMG_3957.JPEG

IMG_3953.JPEG

IMG_3958.JPEG

IMG_3960.JPEG

IMG_3961.JPEG

  • Like 1
  • Excellent 18

Share this post

Link to post
Share on other sites
 

ri702bill    9,670

ri702bill
Posted (edited)

If the Unidrive on either 854 is in questionable condition, consider doing a later 6 or 8 speed swap. It becomes a whole new tractor - the one that Cecil & Elmer never made, but should have...... low range at WOT is great for using the snowblower.

 

P1010325.JPG

8 Speed Dipstick Clearance.jpg

Edited by ri702bill
  • Like 3

Share this post

Link to post
Share on other sites
 

ri702bill    9,670

ri702bill
Posted

Looks like a 36" curved deck - I find that style out performs the rectangular "suitcase" style.....

  • Like 2

Share this post

Link to post
Share on other sites
 

gwest_ca-(File Mod)    11,596

gwest_ca
Posted

The serial number on the 854 is on the shift pattern decal.

  • Like 2

Share this post

Link to post
Share on other sites
 

Sparky-(Admin)    23,516

Sparky
Posted

SCORE!! 
  Yep, I’m jealous :lol:

  • Like 2

Share this post

Link to post
Share on other sites
 

Clayton    22

Clayton
Posted

Its funny I joined this forum yesterday and today I see the tractors I've been eyeballing got snagged up by a member here. Congrats on the good buy!

  • Like 2
  • Haha 1

Share this post

Link to post
Share on other sites
 

WHGuy413    2,796

WHGuy413
Posted

What a score! 

  • Like 1

Share this post

Link to post
Share on other sites
 

2003Chevy    47

2003Chevy
Posted
25 minutes ago, Clayton said:

Its funny I joined this forum yesterday and today I see the tractors I've been eyeballing got snagged up by a member here. Congrats on the good buy!

==

 

I saw them on a trailer in the parking lot at my mechanic's shop.  He was parking the trailer there to show off the tractors and the :for sale: sign for the seller who is a relative of his.  Of course while driving past, I saw them.  I called my mechanic and he told me to stop over on way home, which I did.  And that there's the backstory.  

  • Like 1

Share this post

Link to post
Share on other sites
 

oliver2-44    10,831

oliver2-44
Posted

Triple Score!

Share this post

Link to post
Share on other sites
 

oliver2-44    10,831

oliver2-44
Posted
4 hours ago, Clayton said:

Its funny I joined this forum yesterday and today I see the tractors I've been eyeballing got snagged up by a member here. Congrats on the good buy!

Ali nice to @2003Chevy he might share $$ one!

Share this post

Link to post
Share on other sites
 

Retired Wrencher    5,955

Retired Wrencher
Posted

@2003Chevy you did well for just driving by.Treat them well and get the third one running. Enjoy the project.

Share this post

Link to post
Share on other sites
 

Pullstart    67,414

Pullstart
Posted

I like your loading style :handgestures-thumbupright:

 

 

IMG_0858.jpeg

  • Thanks 1
  • Haha 2

Share this post

Link to post
Share on other sites
 

953 nut    60,978

953 nut
Posted

Nice haul, no need to leave any empty space on the trailer.                :text-coolphotos:

I did a three for one trip years back, had to take the tires off one of the RJs to get them both in the bed of the little Dakota.

HPIM0409.JPG.aa41a38d22fe0dde9b75bedfe9c8d3e4.JPG

  • Like 2
  • Excellent 1

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • dlashb40
      The Longevity of a Wheel Horse
      By dlashb40
      As a retired 61-year-old who inherited 4 of my Grandfather's Wheel Horse tractors, I found a valuable resource in this forum. Here, I connected with Bob Parks (Racinbob), who at the time lived nearby and kindly agreed to help me identify all of them. I ended up keeping the 1964 Model 854 and sold the others. The 854 is a solid, primarily original tractor, and I've been using it since I was 6-years-old. I also had the RM-364 mower deck attachment, which had not been on the tractor for many years. Once again, this forum proved its worth as I could identify and obtain some attachment parts that I was missing. Last week, after some adjustments, I put the mower deck to use and mowed nearly an acre of grass without any issues. The sense of accomplishment in identifying and restoring the equipment was truly inspiring, and I felt like I was a kid again. 
       
      As someone who doesn't consider themselves 'mechanically inclined,' I've grown and learned much through this project. I want to express my heartfelt thanks to all of those who guided me and showed me that with the right support, even the most daunting tasks can be tackled.  

    • Bodean
      In search of
      By Bodean
      In search of bottom plate for 854 two pieces tank mine is cracked will take whole tank if one is available i have a replacement gasket already thanks

    • Bodean
      Rebuild update
      By Bodean
      Slow but sure turning the corner get big red back together waiting on transmission seals 

    • WH1618speed
      WH 855 with 42" Blade
      By WH1618speed
      1965 Wheel Horse 855 with 42" blade and chains 
       
      Runs good
      Sheet metal is very straight, great candidate for restoration. 
      Missing Belt guard 
      Will sell tractor by itself for $500 without blade and chains 
      Blade is straight and lots of cutting edge left... just a little rusty. 
       
      Text, call, or email with any questions. If you call and I don't answer please leave a voicemail with your name and number. Thanks!
       
      I can also deliver to the big show in Arendtsville, PA... IF you prepay. 
       
      Facebook Marketplace link with more pics: https://www.facebook.com/marketplace/item/598023068755689?rid=229092436403311&ad_id&rt=1&refID=0&refType=0&referral_code=commerce_attachment
       
       

    • rustyedge1
      Original Wheel Horse 1578 Belt pair USED and AS IS
      By rustyedge1
      These belts have been hanging in my garage since last used I believe there off a 754 I used to have. Bought them new and didn't use much.
      Don't know why I took them off. Some fraying on top in a few places from use, also don't know why but selling as is and photo'd. 20.00 shipped if you can use them.
      PM for PayPal info or questions. 16" ID approx.
       




×
×
  • Create New...