hotajax 229 #1 Posted August 9 Zerk fits in the center of the three spindles on a 48" mower deck. Do you know the thread that is required? I need this for the correct easy-out, and to purchase new zerks. Thanks in advance. Share this post Link to post Share on other sites
Andy N. 2,417 #2 Posted August 9 23 minutes ago, hotajax said: Zerk fits in the center of the three spindles on a 48" mower deck. Do you know the thread that is required? I need this for the correct easy-out, and to purchase new zerks. Thanks in advance. They should be 1/4"-28. I keep a variety set like the link below and 1/8" or #1 easy out like the long one in the set below should work when the fitting gets sheared off flush. https://a.co/d/c4BXRpn https://a.co/d/5KNqMWo 2 Share this post Link to post Share on other sites
pfrederi 18,714 #3 Posted August 10 I use one of these 2 Share this post Link to post Share on other sites