Raider 10 Front Blade Availability / Interchange

[jsoluna 449]

11 minutes ago, rjg854 said:

That's what you're looking for 

Sweet.  Is it missing anything more than the rear axle brackets?  I don't see the blade angle adjustment bar anywhere.  

Edited August 10, 2025 by jsoluna

[rjg854 12,834]

Make sure he has all the parts for the blade. I may have the axle bracket you need.

[jsoluna 449]

19 hours ago, rjg854 said:

Make sure he has all the parts for the blade. I may have the axle bracket you need.

Thanks 👍🏼 

 

Any guess what model of blade that could be, or a suggestion for what model to reference to make sure I'm generally looking at a correct IPL when making sure these blades have everything they need?

[c-series don 11,245]

@jsoluna The blade in the last picture is for a D-series tractor, you can tell by the fact that it has four trip springs and the mount on the right side where the angle lever attaches is a big boxy thing. The correct one doesn’t have that and has two trip springs. That blade I believe is 54” or 56”s wide and it’s a little taller. I put one of those on my Work Horse GT-1800 once, and even with the hydraulic lift it seemed to be a bit much for the tractor. I ended up taking it off and going back to a 48” blade. It might fit your tractor but I’d wait for the correct one. 

Edited August 11, 2025 by c-series don

[jsoluna 449]

36 minutes ago, c-series don said:

@jsoluna The blade in the last picture is for a D-series tractor, you can tell by the fact that it has four trip springs and the mount on the right side where the angle lever attaches is a big boxy thing. The correct one doesn’t have that and has two trip springs. That blade I believe is 54” or 56”s wide and it’s a little taller. I put one of those on my Work Horse GT-1800 once, and even with the hydraulic lift it seemed to be a bit much for the tractor. I ended up taking it off and going back to a 48” blade. It might fit your tractor but I’d wait for the correct one. 

Thanks for the detailed description.  Will keep looking!

[rjg854 12,834]

12 hours ago, c-series don said:

The blade in the last picture is for a D-series tractor

I did not notice that Don, I should have taken a better look, thanks for picking that out.  

[jsoluna 449]

Here's another local blade that just popped up.  Does this look to be a proper fit?

 

I had a very kind forum member also offer one that is a couple hours drive, and it is in better shape than this one.  Making time for 6+ hour road trip is difficult right now so if I can find one locally, that's more realistically possible.

[rjg854 12,834]

That one should work !