Jump to content
jsoluna

Raider 10 Front Blade Availability / Interchange

Recommended Posts

jsoluna
Posted (edited)
11 minutes ago, rjg854 said:

That's what you're looking for :handgestures-thumbupright:

Sweet.  Is it missing anything more than the rear axle brackets?  I don't see the blade angle adjustment bar anywhere.  

Edited by jsoluna

Share this post


Link to post
Share on other sites
 
rjg854

Make sure he has all the parts for the blade. I may have the axle bracket you need.

  • Like 1

Share this post


Link to post
Share on other sites
 
jsoluna
19 hours ago, rjg854 said:

Make sure he has all the parts for the blade. I may have the axle bracket you need.

Thanks 👍🏼 

 

Any guess what model of blade that could be, or a suggestion for what model to reference to make sure I'm generally looking at a correct IPL when making sure these blades have everything they need?

Share this post


Link to post
Share on other sites
 
c-series don
Posted (edited)

@jsoluna The blade in the last picture is for a D-series tractor, you can tell by the fact that it has four trip springs and the mount on the right side where the angle lever attaches is a big boxy thing. The correct one doesn’t have that and has two trip springs. That blade I believe is 54” or 56”s wide and it’s a little taller. I put one of those on my Work Horse GT-1800 once, and even with the hydraulic lift it seemed to be a bit much for the tractor. I ended up taking it off and going back to a 48” blade. It might fit your tractor but I’d wait for the correct one. 

Edited by c-series don
  • Like 1

Share this post


Link to post
Share on other sites
 
jsoluna
36 minutes ago, c-series don said:

@jsoluna The blade in the last picture is for a D-series tractor, you can tell by the fact that it has four trip springs and the mount on the right side where the angle lever attaches is a big boxy thing. The correct one doesn’t have that and has two trip springs. That blade I believe is 54” or 56”s wide and it’s a little taller. I put one of those on my Work Horse GT-1800 once, and even with the hydraulic lift it seemed to be a bit much for the tractor. I ended up taking it off and going back to a 48” blade. It might fit your tractor but I’d wait for the correct one. 

Thanks for the detailed description.  Will keep looking!

  • Like 1

Share this post


Link to post
Share on other sites
 
rjg854
12 hours ago, c-series don said:

The blade in the last picture is for a D-series tractor

I did not notice that Don, I should have taken a better look, thanks for picking that out.  :handgestures-thumbupright:

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...