Gagetmag 0 #1 Posted yesterday at 03:07 AM I recently bought a 1973 c-160 automatic and the axle seal was bad so I found one online and ordered and when I went to put it in it didn’t fit almost like OD was just to big it was a #6449 but I was reading and I also found a #5958 so my question here is which one do I need Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,478 #2 Posted yesterday at 04:19 AM Do you have a 1973 16hp Automatic or a 1974 or later C-160 Automatic? Required to look up the correct parts. Have the long model number and serial number? Share this post Link to post Share on other sites
953 nut 59,967 #3 Posted yesterday at 12:22 PM 6449 is a good number on hydrostatic transaxle oil seals. I have gotten them on and been very pleased with the fit and performance. https://www.ebay.com/itm/142042768245 Share this post Link to post Share on other sites
lynnmor 7,815 #4 Posted yesterday at 12:48 PM 23 minutes ago, 953 nut said: 6449 is a good number on hydrostatic transaxle oil seals. I have gotten them on and been very pleased with the fit and performance. https://www.ebay.com/itm/142042768245 I've used those seals for years without a problem. I wonder if @Gagetmag got defective seals or if he damaged them when installing. I use the axle hub as a slide hammer to press them in. Share this post Link to post Share on other sites
pfrederi 18,669 #5 Posted yesterday at 01:11 PM I have used CR 11124 for several hydros no issues. Share this post Link to post Share on other sites
