ISAVETRACTORS is closing

[stvski80085 207]

Hi,

After more than a decade of serving this amazing community, I’m writing to share some important news:

iSaveTractors is officially winding down and closing.

Since day one, my mission has been to help you keep your vintage garden tractors and small cast iron engines running strong. I’m incredibly proud that iSaveTractors has become a trusted source for hard-to-find parts, knowledge, and support.

Whether you’ve placed one order, followed our YouTube channel, or simply shared our name with a friend — thank you. Your support over the years made all of this possible, and I’m deeply grateful.

As we close:

•       Inventory is limited and won’t be restocked
•       All sales are final
•       Orders may take up to 5 business days to ship

If there’s anything you need — now’s the time to order. Once parts are gone, they’re gone for good.

🛒 Shop remaining parts here → http://www.isavetractors.com

Thank you again for being part of the iSaveTractors journey. It’s been an honor.

– Norman Ng
Founder, iSaveTractors
 

Edited Thursday at 03:37 PM by stvski80085

[SylvanLakeWH 28,048]

Thank you. 

[squonk 43,252]

His gasket sets were excellent. If you're thinking about doing an engine in the near future, might be a good time to get a set on sale before they are gone.

 

[Pullstart 65,573]

As an enthusiast who makes most all his own supplies, I have a hard time justifying the prices of some things I can build.  However, there are companies who supply things I can’t create myself, and that’s sad to see them go…

[Tractorhead 9,163]

A big loss for the whole Small Engine Community.

Losing a well competent and assorted Dealer is very Sad.

 

 

[Bill D 2,198]

Sad to hear this.  I bought a carb from him years ago.  Good quality. 

[TonyToro Jr. 1,840]

Just did my order. Very good parts at a fair price.

[Achto 29,214]

@stvski80085 Thank you for all you have done for this community.  

[Brockport Bill 1,873]

got the email today about their closing -- fortunately Norman's You Tube videos can still be seen --- videos are very helpful -- I bought modest number of parts over recent years -- ok quality and fair prices - - plus, i always try to spend my $ with the small business entrepreneur than big corporations.

 

After more than a decade of serving this amazing community, I’m writing to share some important news:

 

iSaveTractors is officially winding down and closing.

 

Since day one, my mission has been to help you keep your vintage garden tractors and small cast iron engines running strong. I’m incredibly proud that iSaveTractors has become a trusted source for hard-to-find parts, knowledge, and support.

 

Whether you’ve placed one order, followed our YouTube channel, or simply shared our name with a friend — thank you. Your support over the years made all of this possible, and I’m deeply grateful.

 

As we close:

 

•    Inventory is limited and won’t be restocked

•    All sales are final

•    Orders may take up to 5 business days to ship

 

If there’s anything you need — now’s the time to order. Once parts are gone, they’re gone for good.

 

🛒 Shop remaining parts here → http://www.isavetractors.com

 

Thank you again for being part of the iSaveTractors journey. It’s been an honor.

 

– Norman Ng

Founder, iSaveTractors

 

 

 

[WHX?? 51,325]

Yep saw this on FB couple days ago. Was too depressed to say anything. I bought his head gaskets religiously. 

[Lane Ranger 11,198]

Yes a good source for parts and a great vendor!  I bought a few hard to find parts this am! 
 

A big thank you to Norm for all he did to provide needed parts! 

[Sparky-(Admin) 22,730]

Ordered a few items this morning. Sad to see IST is folding up. 
 

[Horsin'round 208]

I emailed Norman yesterday to express my thoughts.  He replied almost immediately that he intended to stay active in the hobby,  but lamented wrt the burdens of a business.  I wish him all the best!

[AlexR 1,681]

Put my order in as well. 

[Retired Wrencher 5,717]

I bought some fuel pump rebuild kits today. There nice to have and made very well, not like that junk on eBay. Still sad that they going out. They have some nice engine kits.EBay has crazy prices.

Edited Saturday at 02:44 AM by Retired Wrencher

[sqrlgtr 606]

placed order for a couple fuel pump kits. 

[Retired Wrencher 5,717]

2 hours ago, sqrlgtr said:

placed order for a couple fuel pump kits. 

@sqrlgtr You will like these. They fit well no punching extra holes to fit like other brands.

Edited Saturday at 09:50 AM by Retired Wrencher

[MikMacMike 489]

I so wish there was a way to help him stay in businesss

[AHS 1,521]

Moderators; move this as you may! It’s sad that isavetractors is closing. I was a frequent customer!! Carbs, to fuel pump kits, points and more! I know you can get points nearly anywhere; from Kohler to ebay. Where do they get their carbs? With their names etched into the bowls! IMO good carbs! Fuel pump kits; where do they get those?  I got a carb for an C101 and a magnum 12 to buy. Any questions about isavetractors, just write em in.

[squonk 43,252]

 

[leeave96 490]

My question - and maybe this should be a different topic…

 

What parts are out there that are no longer available that if you needed one, you would have to park the tractor due to lack of supply?

[Brockport Bill 1,873]

he mentions in his You Tubes about his carbs - i recall Norm says they are designed to his spec from Taiwan mfg - here is label photo from a carb i bought from them - - note the bottom of label indicating Taiwan - if you want to know the specific manufacturer i suppose you would have to call or email him??

[AHS 1,521]

2 hours ago, leeave96 said:

My question - and maybe this should be a different topic…

 

What parts are out there that are no longer available that if you needed one, you would have to park the tractor due to lack of supply?

Well, it just the quality of Norman’s carbs. 

[AHS 1,521]

@squonk oops!!

[AHS 1,521]

22 hours ago, MikMacMike said:

I so wish there was a way to help him stay in businesss

YES!! I was thinking of this myself! But, with a big big building, I can’t imagine the light bill. For Norman to sell products at such a reasonable price,…