jeff lary 173 #1 Posted May 15 Hello all I am in need of at least 2 of these snowblower chute guides can anyone point me in the right direction all help is appreciated? I have tried Amazon, and Ebay but have had no luck I can call an old dealer but I kind of doubt they would have any. Thanks Jeff Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,442 #2 Posted May 15 Have a local Toro dealer? https://www.partstree.com/parts/toro-25-5450/ Share this post Link to post Share on other sites
jeff lary 173 #3 Posted May 15 (edited) Yes, I used to have 2 local dealers but the one that was the most help has since closed up shop. I saw the Parts Tree one too I thought $40.00 was kind of expensive. There was a person on here that had a post back in 2019 that he had made some. lynnmor I have sent that person a pm a moment ago, but I really have no idea if they are still active here. EDIT::: I just called the dealer he can get them they are almost the same price. Edited May 15 by jeff lary Share this post Link to post Share on other sites
lynnmor 7,789 #4 Posted May 15 16 minutes ago, jeff lary said: Yes, I used to have 2 local dealers but the one that was the most help has since closed up shop. I saw the Parts Tree one too I thought $40.00 was kind of expensive. There was a person on here that had a post back in 2019 that he had made some. lynnmor I have sent that person a pm a moment ago, but I really have no idea if they are still active here. EDIT::: I just called the dealer he can get them they are almost the same price. Sent you a PM. 1 Share this post Link to post Share on other sites
peter lena 9,231 #5 Posted May 15 @jeff lary https://www.google.com/search?q=snow+slider+sled+matrial&sca_esv=70b5c3d27dd6e643&rlz=1C1CHBF_enUS866US866&sxsrf=AHTn8zraFoSc4-O cut out a base chute slide gasket , makes it swivel with ease , done a number of blower chutes , something I tried worked out very well , also sprayed this down with snow chute slide spray , detailing in ENTIRE MOVABLE SET UP , for smooth easy reaction . used a fishing line as a trial chute tracker , verified what worked , then replaced it with stainless cable , also threaded the end of the control rod , with a DIE NUT , added a screw on knob , that made glove / mitten work with ease . like most w/h anything , it needs functional detailing . pete 1 Share this post Link to post Share on other sites
jeff lary 173 #6 Posted May 15 Thank you and I just replied Share this post Link to post Share on other sites
Wayne0 1,163 #7 Posted May 15 (edited) I got mine from lynnmor. They're perfect. Edited May 15 by Wayne0 1 Share this post Link to post Share on other sites
