jeff lary 173 #1 Posted Thursday at 06:57 PM Hello all I am in need of at least 2 of these snowblower chute guides can anyone point me in the right direction all help is appreciated? I have tried Amazon, and Ebay but have had no luck I can call an old dealer but I kind of doubt they would have any. Thanks Jeff Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,284 #2 Posted Thursday at 07:13 PM Have a local Toro dealer? https://www.partstree.com/parts/toro-25-5450/ Share this post Link to post Share on other sites
jeff lary 173 #3 Posted Thursday at 07:20 PM (edited) Yes, I used to have 2 local dealers but the one that was the most help has since closed up shop. I saw the Parts Tree one too I thought $40.00 was kind of expensive. There was a person on here that had a post back in 2019 that he had made some. lynnmor I have sent that person a pm a moment ago, but I really have no idea if they are still active here. EDIT::: I just called the dealer he can get them they are almost the same price. Edited Thursday at 07:23 PM by jeff lary Share this post Link to post Share on other sites
lynnmor 7,628 #4 Posted Thursday at 07:37 PM 16 minutes ago, jeff lary said: Yes, I used to have 2 local dealers but the one that was the most help has since closed up shop. I saw the Parts Tree one too I thought $40.00 was kind of expensive. There was a person on here that had a post back in 2019 that he had made some. lynnmor I have sent that person a pm a moment ago, but I really have no idea if they are still active here. EDIT::: I just called the dealer he can get them they are almost the same price. Sent you a PM. 1 Share this post Link to post Share on other sites
peter lena 9,114 #5 Posted Thursday at 07:38 PM @jeff lary https://www.google.com/search?q=snow+slider+sled+matrial&sca_esv=70b5c3d27dd6e643&rlz=1C1CHBF_enUS866US866&sxsrf=AHTn8zraFoSc4-O cut out a base chute slide gasket , makes it swivel with ease , done a number of blower chutes , something I tried worked out very well , also sprayed this down with snow chute slide spray , detailing in ENTIRE MOVABLE SET UP , for smooth easy reaction . used a fishing line as a trial chute tracker , verified what worked , then replaced it with stainless cable , also threaded the end of the control rod , with a DIE NUT , added a screw on knob , that made glove / mitten work with ease . like most w/h anything , it needs functional detailing . pete 1 Share this post Link to post Share on other sites
jeff lary 173 #6 Posted Thursday at 07:39 PM Thank you and I just replied Share this post Link to post Share on other sites
Wayne0 1,004 #7 Posted Thursday at 11:08 PM (edited) I got mine from lynnmor. They're perfect. Edited Thursday at 11:09 PM by Wayne0 1 Share this post Link to post Share on other sites
