2025 Big Show Buy/Trade/Sell Thread

[squonk 43,311]

1 hour ago, WHX?? said:

The Squonky may be interested in this ... 

701/K161 parts motor. Block appears to be good. Cross hatch in bore and piston stamped 030. Crank & SG & belt guard the only thing missing. No carb either & fly wheel has a crack in key way. 

 

$30 for all. 

Yes! I'll take it!  ( but you got to put it back together !) 

 

Do I get the tote?     

Edited April 26 by squonk

[Mike'sHorseBarn 3,174]

I'll be looking for a good 3 speed transmission if anyone has one they'd like to quit tripping over in their shops 

[fast88pu 3,359]

1 hour ago, Mike'sHorseBarn said:

I'll be looking for a good 3 speed transmission if anyone has one they'd like to quit tripping over in their shops 

I got a couple parts ones if you wanna build a good one

[Ed Kennell 41,311]

I got this blower in a trade 3 years ago and have been waiting for a snow that never comes.  So, I decided to move it on.   I did use it one time last winter in a 6" snow and it worked great, but most of our snows are the 3" slushy stuff more suited to plow.         $400 delivered to the show.

 

 

[c-series don 9,761]

Everyone start preparing for a really bad winter as soon as Ed sells his snowblower 🤣🤣🤣🤣

[fast88pu 3,359]

Full part out 522xi. Let me know what you need. Rear rims sold, engine pending

Edited May 2 by fast88pu

[adsm08 2,950]

12 hours ago, Mike'sHorseBarn said:

I'll be looking for a good 3 speed transmission if anyone has one they'd like to quit tripping over in their shops 

 

 

If I can get my tranny swap put together I'll have one, but I doubt I'll have it by the show. I'll probably be trying to pick up the last few parts I need at the show.

[Mike'sHorseBarn 3,174]

Also in search of a good original carb for a k181 kohler.

[76c12091520h 3,875]

1 hour ago, Mike'sHorseBarn said:

Also in search of a good original carb for a k181 kohler.

We'll have a whole table full of em' 

[Pullstart 65,677]

1 hour ago, adsm08 said:

 

 

If I can get my tranny swap put together I'll have one, but I doubt I'll have it by the show. I'll probably be trying to pick up the last few parts I need at the show.

Bring your project!  It’ll give us something to do 

[Sparky-(Admin) 22,801]

11 hours ago, 76c12091520h said:

We'll have a whole table full of em' 

  I can vouch! Bought a carb for my B-80 last year and it’s been great! Just mowed the yard yesterday with it…zero issues.

  

  

[19richie66 17,598]

13 hours ago, fast88pu said:

Full part out 522xi. Let me know what you need. Rear rims sold, engine pending

If you don’t sell the transmission, maybe cut me a sweet deal on it next year?  😂

[pfrederi 18,549]

any interest in this finish mower for a D Series.  Went over it when I got it several years ago replaced some bearings repacked them all new blades belt and primed it.   Didn't use it much and then got a bigger finish mower so it has sat in side for many years..The one side plate could use a patch  didn't affect mowing.  $500 negotiable

 

 

[adsm08 2,950]

23 hours ago, Pullstart said:

Bring your project!  It’ll give us something to do 

 

Well I'm planning to bring the tractor in question at least. I suppose I should at least throw the tranny in the car.

 

 

I still need the whole brake band/backer and input pulley for an 8-speed and a Raider 10 or 12 brake rod though.

Edited April 30 by adsm08

[clueless 3,181]

      SOLD                 

Edited May 9 by clueless
sold

[wallfish 17,838]

On 4/28/2025 at 10:08 PM, Pullstart said:

Bring your project!  It’ll give us something to do 

Yeah, projects have happened right out there in the field quite often!

[Achto 29,223]

Adding a link just for some more exposure. 

 

 

[Darrenw85 639]

SOLD 

Dual Wheel Kit.  $100

Edited May 8 by Darrenw85
Sold

[Ken B 3,173]

I’m looking for a mint or really nice, 418 or a 420. I would also consider a really nice 61 Suburban. Can be Techy powered if electric start and run properly. Must be really nice. I will be at big show.

[squonk 43,311]

Still looking for a Kohler K181 flywheel  # 231770 

 

[Lane Ranger 11,234]

Things I am bringing to sell at the Big Show.

 

i will have all the items on the list.

 

i have photos of some and I have already sold the Snowplow/Dozer Blade repop  skids.

 

I just found three new ( but a little rusty) early gear driven deck spindles.  Not sure if for Lawn Ranger type decks  which were 32 or for 36 inch decks.  Ruth but can be easily cleaned and they are new and unused.  $20  for all three.  
 

All other items priced on the list.

 

 

Edited May 10 by Lane Ranger

[953 nut 59,172]

@Lane Ranger, I will take that grill for $ 35.   Pay at the show OK with you?

[Lane Ranger 11,234]

3 hours ago, 953 nut said:

@Lane Ranger, I will take that grill for $ 35.   Pay at the show OK with you?

 

 

sure thing Richard!

 

 

[Lane Ranger 11,234]

I also have a Tecumseh Starter Spring Part # 730528. For $5.

 

 

An RJ/Suburban Repo. tombstone weight bracket.   $40

 

 

 

 

 

 

[sqrlgtr 622]

WANT TO BUY or TRADE 4

1-looking for wide rear rims like the wide ones that came on the 520's wheel horse preferred.

2-wheel weights 8' front and 12' rear wheel horse preferred 

3-really like to find side mounted sickle mower for c series or short frame tractor.

FOR SALE or TRADE maybe????

Have 69 GT14 I can bring if someone is interested. Runs good and seems to have stout hydro.

Edited May 11 by sqrlgtr
spelling