AlexR 2,329 #251 Posted 10 hours ago I got a idea for tie rods I think you guys will like. So they have these heim joints that have left and right hand threads that weld to round pipe. So the 3/8 heim joints will weld to 3/4 inch tube. I can get the a 3' round tube for about $12 and a set of 4 joints I can get for around $30 All I got to do is cut the tube to length and weld it on. 1 Share this post Link to post Share on other sites
Handy Don 15,376 #252 Posted 8 hours ago 1 hour ago, AlexR said: idea for tie rods I've seen these on some tractors at the Big Show. Be sure to use tubing with an adequate wall thickness 1 Share this post Link to post Share on other sites
AlexR 2,329 #253 Posted 4 hours ago 4 hours ago, Handy Don said: I've seen these on some tractors at the Big Show. Be sure to use tubing with an adequate wall thickness That is true but the ones I am looking at are made to be used with 3/4 " 16ga wall thickness that's what fits the weldable sleeve. Share this post Link to post Share on other sites
