48 inch drive belt ( belt from PTO to 48 inch deck)

[snowhound 105]

I have a GT1800 with a 48 in deck and need the belt number or length for the belt that goes from the PTO to the deck.

[ebinmaine 71,613]

I'm thinking it's a 1/2 by 103

[gwest_ca-(File Mod) 11,359]

Drive belt 102742 replaced by 94-2501 (1/2" x 103")
Spindle belt 1594 (1/2" x 107.21")

[peter lena 9,176]

@snowhound  often refer to related anything at a movement point  ?  never look at a problem with only the most obvious failure lookin at you ?  simple easy to me , my PTO / MUEL drive belt moves with ease  ? most of the stuff I see is solid  binding rust , at every hand off area , any possible thought , or interest to  other related drag / binding points ? nothing sarcastic intended , but this is a never ending  obvious correction . realise this is a constant issue on any related , linkage / movement point / area . repetitive failures , are your best opportunity , to eliminate them . make a detail change , you already know what is failing . for the purest , you could not possibly , make any improvement . so you replace in kind ?   makes no sense to me , my decks spin up with no effort or squealing  pto drive clutch , how could that be ? BTW  like the TRACTOR SUPPLY  drive belts , no issues ,pete  

[snowhound 105]

Peter, I agree with everything that you said, you should always look at the whole picture.  In this case the belt isn't being replaced due to a failure, I recently purchased a 48" deck but the needed belt wasn't included so I need to purchase one.