953 nut 51,893 #4 Posted April 18 Hate these long winded threads. 2 6 Share this post Link to post Share on other sites
rmaynard 14,922 #7 Posted April 18 Just a transmission or whole tractor? Share this post Link to post Share on other sites
Mark siebenaler 37 #8 Posted Sunday at 03:18 AM Sorry it's a Bronco 14 going thru it all now head off valve job done runs good now. My question is Finally. How come the tow release valve goes in Circles . It was moving very slow especially in reverse. It was a little low on oil atf oil. It's better now but should or should not the valve stop at 360 degrees it was slightly not parallel with the frame At first. Share this post Link to post Share on other sites
kpinnc 10,822 #9 Posted Sunday at 07:21 AM (edited) Tow valve on a hydrogear has two working positions: peg forward or back. You should have a decal that looks like this: Edited Sunday at 07:21 AM by kpinnc 1 Share this post Link to post Share on other sites
Ed Kennell 35,904 #10 Posted Sunday at 12:12 PM (edited) 8 hours ago, Mark siebenaler said: How come the tow release valve goes in Circles . It is not a stem type valve that screws in to close. Edited Sunday at 12:17 PM by Ed Kennell 2 Share this post Link to post Share on other sites