Are inner tubes necessary

[RJC1965 148]

11 hours ago, Wild Bill 633 said:

Wow one can not have to much weight that amazing. And quite a workout to load and unload 

[ebinmaine 63,276]

2 minutes ago, RJC1965 said:

I have a concrete pad and majority is gravel. I have some V-Bar chains I could run those no need to go on the concrete part .

 

I have a set of those same Carlisle Tru Power AG tires. 

To set the chains up in/on them is a challenge. But it can be done. 

I run a 2-link V bar ice chain. Most of the cross links set nicely between the AG bars treads.  

 

[RJC1965 148]

21 hours ago, WHX?? said:

HF mini changer works for me on all tires up to 6 ply. Struggle yes but works. Spoons are a great help. No problems on 4 ply or less. Only 6-12s but still. 

V-61s are not hard to mount at all with this tool. I don't take them to a tire shop as it takes days and they bend me over. Best advice is get thet tire in the sun or warm and use lube.

Thanks for all the information I am definitely getting the mini tire changer. Did you get the V-61 in 4 or 6 ply and are you saying you can mount the six ply just need lots of spoons and lube. Thanks 

[WHX?? 46,893]

48 minutes ago, RJC1965 said:

Thanks for all the information I am definitely getting the mini tire changer. 

Definitely one of the better tools I've bought. 

 

49 minutes ago, RJC1965 said:

 Did you get the V-61 in 4 or 6 ply 

Don't remember will have to look. 4 ply I think. 

 

51 minutes ago, RJC1965 said:

 are you saying you can mount the six ply just need lots of spoons and lube. 

Yes 6 plys need lots of lube but what really helps if they  are in a warm sun or in front of the wood stove for a bit. Rubber is much more pliable. 

[RJC1965 148]

1 hour ago, WHX?? said:

Definitely one of the better tools I've bought. 

 

Don't remember will have to look. 4 ply I think. 

 

Yes 6 plys need lots of lube but what really helps if they  are in a warm sun or in front of the wood stove for a bit. Rubber is much more pliable. 

Thanks WHX I will getting the 6ply V-61 tires same size, inner tubes name brand like Firestone or Good Year, HF mini tire changer and also what looks like a tool to hold the inner tube fill valve in place. Apply some heat to warm up the tires with lots of lube to install. I will be keeping the stock rims as well no real advantage to spending extra on trailer hubs and rims. Will keep everyone updated on my progress. Appreciate everyone’s input Thanks 😊 

[sjoemie himself 2,920]

On 10/31/2023 at 11:47 AM, Wild Bill 633 said:

Hoooly moooly! If you have'nt got traction now nothing can help you!