Dadof2 5 #1 Posted November 8, 2022 Does anyone have information or know of a video showing how to rewire a HH 100 10 Amp stator? I have the same one in the picture. Thanks! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,503 #2 Posted November 8, 2022 Should be in the Tecumseh service manual 1 Share this post Link to post Share on other sites
Snoopy11 5,713 #3 Posted November 8, 2022 (edited) 16 hours ago, Dadof2 said: Does anyone have information or know of a video showing how to rewire a HH 100 10 Amp stator? I can tell you straight up. The 2 yellow wires are AC power, so they go to your regulator. The green wire is kill switch ground (grounds stator when circuit is completed... grounding this wire prevents and charge pulses from reaching the charge terminal on the SSI unit). The wire all by itself is SSI charge wire... that would go to the left side of the SSI module itself. Don Edited November 8, 2022 by Snoopy11 Share this post Link to post Share on other sites
Snoopy11 5,713 #4 Posted November 8, 2022 @gwest_ca... is there any way to add the above pictures that I posted to the service manual? It would be REALLY helpful to Techy techs.... at least it was to me... Don Share this post Link to post Share on other sites
