rayvanzant 4 #1 Posted October 9, 2022 (edited) Hi All, just joined this forum as I need some help with a tractor I just bought. Now I bought this tractor with no manual for it and I like to do my own maintenance. So here's my problem.. I took a picture of my tag on the tractor and when I go to look up any info on it I get a dead end. My tractor's model number is 32120501 11250. The closest I found is 32120503, so is there a difference? What I like to see is how I can take down the mower deck ,so I can change the blades and as I said,I like to be able to buy my own parts.Any help I would love. Thank You Edited October 9, 2022 by rayvanzant Want to get any replies on my post 2 Share this post Link to post Share on other sites
The Freightliner Guy 1,361 #2 Posted October 9, 2022 @gwest_ca might just have what you need and welcome to the forum I wish you good luck with your project 2 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,488 #3 Posted October 9, 2022 Welcome to to the forum. The 5th digit in the model number is the letter o for Onan engine - not a zero. Here is the operator manual This is a link to everything associated with the model number https://www.wheelhorseforum.com/search/?q=32-12o501&quick=1&type=downloads_file This mower deck may not be the one you have but the install and removal should be the same. 1 1 Share this post Link to post Share on other sites
rayvanzant 4 #4 Posted October 9, 2022 (edited) Thank You,I will download and read up on my tractor. This deal was to sweet to pass up, I paid $125( which including the guy welded the holes in the deck and deliver the tractor).All I had to do was replace the battery( $23 at Lowes),tape up the seat with Gorilla tape and put air in tires( they looked to low to me). I am used to a 42 inch 18 HP tractor, so this smaller one, I think it's a 38 inch deck and 12 1/2 hp,I have to get used to. After looking at the manual,I must have a 30 inch deck. Edited October 9, 2022 by rayvanzant mistake made 2 Share this post Link to post Share on other sites
Horse Newbie 7,395 #5 Posted October 10, 2022 Welcome to Redsquare @rayvanzant ! You can turn your deck blades side to side/ end to end and measure to find your deck size… 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,488 #6 Posted October 10, 2022 Share this post Link to post Share on other sites
rayvanzant 4 #7 Posted Saturday at 06:34 PM Sorry it took me a few years to get to you all. Two years ago, I had a guy take my tractor and go through the whole thing,I have a 37" deck. He was shocked at the size, but this tractor cuts sweet with new blades. Share this post Link to post Share on other sites
