rayvanzant 4 #1 Posted October 9, 2022 (edited) Hi All, just joined this forum as I need some help with a tractor I just bought. Now I bought this tractor with no manual for it and I like to do my own maintenance. So here's my problem.. I took a picture of my tag on the tractor and when I go to look up any info on it I get a dead end. My tractor's model number is 32120501 11250. The closest I found is 32120503, so is there a difference? What I like to see is how I can take down the mower deck ,so I can change the blades and as I said,I like to be able to buy my own parts.Any help I would love. Thank You Edited October 9, 2022 by rayvanzant Want to get any replies on my post 2 Share this post Link to post Share on other sites
The Freightliner Guy 1,361 #2 Posted October 9, 2022 @gwest_ca might just have what you need and welcome to the forum I wish you good luck with your project 2 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,489 #3 Posted October 9, 2022 Welcome to to the forum. The 5th digit in the model number is the letter o for Onan engine - not a zero. Here is the operator manual This is a link to everything associated with the model number https://www.wheelhorseforum.com/search/?q=32-12o501&quick=1&type=downloads_file This mower deck may not be the one you have but the install and removal should be the same. 1 1 Share this post Link to post Share on other sites
rayvanzant 4 #4 Posted October 9, 2022 (edited) Thank You,I will download and read up on my tractor. This deal was to sweet to pass up, I paid $125( which including the guy welded the holes in the deck and deliver the tractor).All I had to do was replace the battery( $23 at Lowes),tape up the seat with Gorilla tape and put air in tires( they looked to low to me). I am used to a 42 inch 18 HP tractor, so this smaller one, I think it's a 38 inch deck and 12 1/2 hp,I have to get used to. After looking at the manual,I must have a 30 inch deck. Edited October 9, 2022 by rayvanzant mistake made 2 Share this post Link to post Share on other sites
Horse Newbie 7,395 #5 Posted October 10, 2022 Welcome to Redsquare @rayvanzant ! You can turn your deck blades side to side/ end to end and measure to find your deck size… 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,489 #6 Posted October 10, 2022 Share this post Link to post Share on other sites
rayvanzant 4 #7 Posted Saturday at 06:34 PM Sorry it took me a few years to get to you all. Two years ago, I had a guy take my tractor and go through the whole thing,I have a 37" deck. He was shocked at the size, but this tractor cuts sweet with new blades. Share this post Link to post Share on other sites
Retired Wrencher 5,789 #8 Posted 5 hours ago As you can see gwest already sent you what you are looking for. He is great for manuals. Enjoy the site and the tractor. Share this post Link to post Share on other sites
