Leaderboard

Time to move my 67 1267 Repowered with a K321. Engine has unknown hours but runs fine with no knocks or smoke. Hence the "Special" Came from an early 80's tractor and I converted it to look like the original Starter /Gen set up. Bud Andrews muffler. I installed newer mid and front Tach a Matic hitches so it can run the newer style attachments. I have had a 42" RD deck on it as well as a Tall Shoot snow blower. I have also plowed snow ,dirt and pulled an 8" plow with it. Has the 6 speed limited slip differential. Paint is 8 years old along with Terry's custom decals. Comes with brand new Carlisle "Farm Specialist 6-12 rear Ag's, Deestone 4.00-8 tri ribs on the front, powder coated wheels, Extended steering shaft, seat springs and adjustable seat. I built this tractor for a tall person. I am 6'1". but it can be put back. Has LED headlights and tail light. rear axle snow plow bracket goes with it Tractor is driven to my front yard for the 4th of July and to the trailer for the local steam show. Thanks for looking. SOLD

After 45 plus years of rebuilding kohlers I’ve decided that in January 2026 I’ll will no longer be rebuilding them. I rebuild single cylinder Kohler K and Magnum series engines k181, k240, k301, k321, k341, M8, M10, M12, M14 and M16. Long blocks starting at 650.00 depending on model and application (wheel horse, Deere, cub cadet, ford, Jacobson, gravely, economy). If I don’t have your specific engine in stock I can rebuild your engine. 8-10 day turnaround for 295.00 labor plus machine work and parts. I don’t cut corners with my rebuilds. I no longer stock or rebuild twin cylinders or K91’s and k171’s PM me with any questions and get on the schedule so I can get you done within the next 12 months.

I’m posting this here hoping there is someone interested in this tractor. This was my grandfather’s and father’s tractor, but has been sitting in the garage unused for probably 10 years. I believe it has always been stored in a garage. I’m not sure what if any issues it might have. Definitely does not start, but could just need a battery and new spark plugs. There is a mower deck, snowblower, and tiller attachment that goes with this, as well as a cab. It is located just outside of Albany, NY and will need to be picked up here. I can scrap this, but I’m hoping to find someone that can and wants to do something more with the tractor. Let me know if you want me to post any additional pictures or if you have any other questions.

1970 Electro 12, runs good. I just took the cover off it to take pics so it does have a battery. It was rescued from the scrap yard, no idea why it was thrown away. I rebuilt the carb and it fired right up. Has the original hub caps. The hydraulic lift works good. Seat is in great shape as well as the front headlight lens. It was repainted at one time and not very well. Getting put in the scrap pile didn't help either. It has an integral hitch in the back, but if you don't need that I'll take $50 off the price. Now for the bad, I haven't changed the trans fluid because the drain plug on the bottom is stripped, the hex head is stripped out and i haven't prioritized fixing it because i don't run it much. Comes with 2 decks, one good and one for parts. Asking $650 as is. Can deliver to the big show in june.

I bought these from a seller clearing a boneyard. Goal was (and is) to keep them from going to the metal scrap yard. They have been outdoors for years and it shows. Since my knowledge of these models is practically nil I cannot add insight beyond my observations. I have no interest in working with these--I’d simply like to see them go to someone who will put the parts to use. I’d prefer not to get involved in parting the tractor or the frame. The mower deck possibly. Here they are on the trailer. First is a pretty much complete but extremely rusted Suburban/400. Rotted rims & front tires; rear AGs have some sidewall cracks but might be usable. Does not roll (it was hoisted onto the trailer). Engine does not turn. Mower deck is there but spindles are locked. Hood is not cut or dented and the throttle/choke levers are in place. The hood hold-downs are rusted out. Seat is excellent. Frame, front axle, spindles, tie rod, and steering appear solid. Three-piece transaxle seems stuck, but there was a shifter boot so probably not too bad inside. Casting code is visible but I don’t know how to read them! Has the mower deck lift adaptor in the slot hitch. Lift arm (and cable!) are there. Kohler K91T engine with carb but no air filter. Gas tank is attached under the hood. The second item is a frame & three-piece transaxle only and a different model (it doesn’t have the notched arch for lift height adjustment but it does have the lift lever with the button.) The rear hubs are there and both axles turn with no grinding so the diff is working. The shifter goes into all four positions but I think the brake drum is rusted to the band lining. Frame, front axle, spindles, and steering all seem complete. No wheels. The mower deck is a 32” with, I think, the mounting brackets for a Lawn Ranger. The gears seem ok but only one spindle is fully free. The shell is remarkably solid. The gauge wheels are definitely replacements. No detailed pictures. Full Tractor FRAME ONLY

SOLD, ty for all the interest.

1974 D200 with snowblower 3 pt and rear PTO 103 original hours Runs amazing $3350 Located in Nappanee, IN No trades

Wheel Horse Steering Shaft Tube Cover part numbers: 109163 , 113443 , 109529 These are reproduction 3D printed steering shaft covers that fit most Wheel Horse 300 and 400 series tractors. These are currrently discontinued. These are 3D printed with PETG so they can handle the sun/rain, they are new items and are more rigid than oem. I’m selling two grades of covers I have a Matte finish carbon reinforced model for $35 and a gloss finish non reinforced for $30 price plus actual shipping, which is usually around $7-8. I will combine multiple parts for one order (shipping fee actual cost only). Items ready to ship now. Message me here or email me for purchase. I currently have many of these ready to go in both styles. I’m also planning to bring some to the Big Show in June (lord willing and the creek don’t rise) So try to message me a week or two before the show if you want one so I can make sure I bring enough and guarantee you get one as they will otherwise be first come first served. I have verified these will fit pre Toro 308, 310, 312, 417, 418, 420-LSE, and Toro 315, 310, 312, 416 models. They measure approximately 6.5” on the shorter side. Please confirm your part number and dimensions before ordering. All orders placed by 9pm Sunday will be shipped out on Monday, shipments will be made weekly. These are made from PETG so they will handle sun, water and heat. They generally feel firmer than the later style solid molded original oem with the 3 internal fins and are worlds better than the thin plastic ones with multiple internal fins from the 80’s. These will still likely break if you strap your tractor down with a rope across the steering shaft so avoid doing that. PayPal or Venmo accepted, good and services welcome but please add 3% for the fee.

1981 C-145 Tractor only Brand new battery Runs smoothly with no issues Located in Nappanee, IN Can deliver to Leseur show August 22-24 if deposit paid in advance $2200

Selling my A-60 electric. It was NOS when I got it in 2023. Put new deep cell batteries in it. Built in charger. Has maybe 10 hours run time on it. Paved road only. Has NOS mower deck - never used. Includes custom trailer built from wheel barrow. Perfect show cruiser. Excellent condition. $750 firm - for the A-60, NOS mower deck and trailer. PM me if interested or any questions.

One-of-a-kind / custom 1975 Wheel Horse "C-180" 8-speed tractor w/ Ark 500 Loader. Restored / built & upgraded during the pandemic, this machine has done some great work over the past 3 years: it's a good looking & functional machine. Many high-end period parts including: -Kohler K-361 (18 HP) engine - rare! -Ark 500 loader w/ fortified bucket -Custom weight box -New 23x10.5-12 tires w/ rubber chains -Very heavy cast-iron wheel weights -Wide / HD front axle from 520H -Steering wheel / gear reduction from 520H -New seat Comes w/ a full gasket kit for the K-361, extra (unmodified) valve cover, original weight box arms, bucket forks, spare hood & a whole other 16 HP K-341 engine! (Can convert to a 16 HP if you prefer the flat head vs OHV) $3K firm Local pickup in Newtown, CT or could potentially deliver in the local area. NO TRADES

I recently picked up a few machines at the big show and they are taking the chore duties of my 604. This machine I am told is not all oem with a few slight changes but she runs mint and shirts the same. Everything works, tires hold air etc. looking to sell to a collector. Thanks! Steve IMG_7410.mov

Time to thin some of the herd. Up for sale is my 1968 Raider 9. The Tecumseh HH100 runs great & does not smoke. Has an electric fuel pump that is on a separate switch. Fiz bomb paint job looks OK. Only know issue is that it is stuck in high range, not a big deal for my use as I rarely use low range. $300 obo, willing to haul to the big show with an agreed sale. Thanks for looking.

NOS complete decks in boxes all have new mule drives and belts with them in the box from factory All located in Medford, Minnesota, willing to ship truck freight on a pallet to a commercial dock if need be could deliver to Garden Tractor daze in Portage Wisconsin in (1) 37” side discharge #0537sc01 with NOS bagger in box - works nicely on the 300 series tractors $1200 for both as a set (1) 42” rear discharge #78353 fits XI series tractors $700 (1) 48” side discharge #78363 fits XI series tractors $800 (1) 32” twin bagger for wheel horse rear engine riders #59184. $200

I have numerous transmission gears for wheel horse tractors from many years of messing with these. More here then what is pictured. Selling by the piece, please message me with what you are looking for and I will see if I have it and can provide a price. Unable to price every individual gear in this ad due to volume.

1956 Wheel Horse RJ35. Restored recently. Kohler K90 engine fully rebuilt, bored oversize, crankshaft turned and valves reground. New bushings and bearings in drive system. 4 new tires. Has hard to find shower cap muffler, schnacke recoil and oil bath air cleaner. You'd be hard pressed to find a nicer early RJ for sale. $2500 located in South Haven,MI

I purchased my 314-8 new in February of 1996. It's been a great tractor. But a few years ago I had landscaping done and contracted for lawn service. So the tractor has been sitting in the garage for a few years. Bought a new battery. It cranks hard, but won't fire. Probably needs the fuel lines or carburetor cleaned. It also needs the clutch shock replaced. I have the new shock and belt. Just haven't gotten around to replacing them. Deck is in excellent shape with new spindles before I parked it. Comes with the nice pull behind spreader that has only been used twice. Thanks for you consideration.

Built by Wallfish 12hp kohler Many ways to make it go faster $500

I believe this is called a two piece cultivator. Believe it’s off of a 1976 wheel horse if I remember correctly. Two of the cutting knives/tines (or whatever they’re called)have been shortened by the PO.

Wheel Horse B-80 Tractor...I believe this to be a 1976 or 77 Model....8hp Kohler Engine...This is a Replacement Engine....Has the Heavy Duty 8-Speed Transmission with Big Axles....Barn Find and has been Setting for Awhile....I Cleaned the Carb and Fuel System and It Runs Well.... Good Solid Factory Nelson Muffler...Tires are all Good....Does NOT Come with a Battery.....Comes with a 36" Mower Deck and an Old Set of Tire Chains....185.00.....Feel Free to Ask Questions....Thanks.

Early 80s Wheel Horse C-85 Tractor....Parts or Repair....Barn Find...Been Stored under a tarp for several years...Lots of peeling paint....8 hp Kohler engine turns free and has compression....Heavy Duty 8 - Speed Transmission with the big axles....Transmission oil is clean....It will need the fuel system gone thru and cleaned for sure....Tires are good and hold air...Comes with Snow Plow, Axle Bracket and a good set of Tire Chains....Check the Pictures, What you see is What There Is......175.00....Thanks.

Wheel horse c-120 Hydro drive Manual lift 12hp Kohler runs great. Even the headlights work! New in line fuel filter New front tires Will come with a 42" side discharge mower deck and mule drive/belt Asking 575 or will consider partial trade for a wheel horse tall chute snowblower in nice shape + cash on your end Pick up in Holland mi. Serious inquires only please. Other W/H tractors/parts/attachments available as well

Brand new never used 2007 315-8 60 th anniversary • 48” wide discharge deck • Can be delivered to Pennsylvania show in June (860) 681-3610 $6,250 Location : Connecticut Can be shipped anywhere Open to trades .

1967 Wheel Horse 1267. Rear wheel weights, chains, dozer blade with electric winch to raise and lower. Runs and drives as it should.

I have a wheel horse 857 with the original Kohler motor it runs and operates just fine with mower deck mower deck does work also I would like to sell it

Kohler K241 engine - new mini block that I bought years ago ( stored in heated dry space) and finally built up. Mini block included piston, rod and camshaft - rest is added from purchase and parts stock. Fired up and ran for 10 minutes and ran fine - I have a video which I can send if interested. Solve your tired engine problems with this - drop in and go for many years of service.

Hey guys. Bought my 1985 Wheel Horse 312-8 which included a 42" mower deck in good shape. I bought the tractor for hauling firewood though, no mowing needed, so removed the mower deck and would like to sell it to anyone interested. See attached photos and can take any more you'd like. Unfortunately can't ship so I'd have to meet you. Reach out, thanks guys

2007 Wheel Horse 315-8 (60th Anniversary) last year wheel house built. —BRAND NEW— machine that has never been used . This tractor has been in a climate controlled environment for 18 years. The engine has been fogged, and does get spun over frequently . This machine is paired with a model: 78361 (48” side discharge deck ) If a serious buyer has interest in seeing everything run I will change out the fluids and start the machine after payment is received . I personally believe this belongs in someone’s collection as it is a time capsule that isn’t easily found. Location : Southington Connecticut Machine can be shipped anywhere . 📞 860_681_3610 $7000 or $8000 with a N.O.S 50” Grader blade

2 tractor package deal . 1991 wheel horse 416-8 700 hours runs excellent Fully serviced . 42” side discharge deck 1996 wheel horse 416-8 400 hours runs excellent Fully serviced . 48” side discharge deck $5500 package deal if I separate 3k each . Located Southington Ct 📞 860-681-3610 IMG_4698.mov IMG_4701.mov

📞 860_681_3610 1980 Wheel Horse C-145 that was restored many years back and has only been to shows since . The machine runs excellent and is mechanically strong. The engine is the original Kohler K321 (14 Horsepower) . The tractor take the same attachments a 300/400/500 series . I have attachments available for additional. $2499 or I can keep weights & drop the price . location – Connecticut Can ship anywhere IMG_3315.mov

416-8 and mower attachment for sale: Model # 73422 -- Very good condition - Powerful 16 hp Onan engine and High Low range 8 speed gear transmission. Many impressive features -- including highly desirable value add electric lift feature for plow or mower deck or other misc WH attachments. Sliding adjustable seat in very good condition, Chrome muffler shield, Chrome reverse rim wheel nuts, new decals and foot treads, strong manuverable 8 inch front wheels/tires. Tractor value price at $955. Mower available as optional purchase - 42 inch side discharge mower deck in very good condition was serviced, sharpened blades, greased spindles, etc available for $415. Tractor and mower available for cash pick up in Poughkeepsie, NY area - sold as is, no returns, no holds, first come basis. Please send p.m. message for questions or to arrange pick up.

Wheel Horse 5000 Watt Generator Great shape Comes as shown $550 Located in Nappanee, IN No trades

C105 w/snowblower. Fully functions as it should. New fuel pump, fuel filter, shut off, & fuel line. Have xtra drive belt. Battery approx 18mo old & always on a maintainer. Engine oil & transmission fluid changed recently. I have an undamaged hood off a C125 I'll include. Need the room in garage desperately because after my back injury I need a hydro lift tractor to replace it.

Call or text with any questions

I have a 1974 B-80.4 speed.Runs and operates as it should.Has some new parts and is in good mechanical shape. the decal on the hood is not correct ! No Deck $350 OBO MD 21061 SOLD !!!

1998 WH 314-8 Tractor...14hp Kohler Command Engine...Runs Very Well...Heavy Duty 8-Speed Trans has the Big Axles...281 Original Hours...Very Nice Unit.....Only Used to Plow Snow from my Drive Since Ive Owned It...I had it set up with Deep Dish Wheel and Ag Tires that Im Keeping for Now....The Rear Turf Tires Pictured are a Set of Spares that I Had...One of the Rear Tires Will Leak Down Slowly....The Deck is a 1996 Model...42" Rear Discharge...It Came with a Tractor that I recently Purchased...All My Decks are Side Discharge So Im Letting this one Go...Nice Solid Shell...No Holes or Patches...Spindles are Solid....The Snow Plow is a 1997 Model....48" Plow with the Desirable 5-Position Head....The Wear Bar has Been Replaced with a piece of 1/2" Bar Stock....I Prefer to Sell Things Together But I guess I would Separate Items for the Right Offer....1250.00 For Everything Pictured....Thanks.

As pictured with wheel weights $4,000, without wheel weights $3,500. Tractor shows 790ish hours but I believe the actual hours to be lower than meter shows due to in having improper wiring causing the hour meter to run when the battery was connected when I got it. Tractor is in very good condition overall either way. Loader has new hoses to control valve. Tractor has been serviced and has a new battery. Front Firestone tri rib tires. All runs/works and functions as it should. Loader has no leaks and cylinders will stay up for weeks at a time without dropping. Located in Columbus, IN 47203 but can deliver to the big show. The only thing bad is the seat as the vinyl is brittle. Loader is tagged with wheel horse model tag, made by Ark.

Has mule drive on it. Tires hold air. Metal is straight.

I have a 1975 C-160 and an unknown year Model 310-8 for sale. Both were to be future projects but I can no longer do them. Both have decks, C 160 was my father's but hasn't run in 2 years. 310 was a barn find. Would like to see them go to a good home and be fixed up.

1992 Wheel Horse 520 H with 2 stage blower, electric controls for the blower shoot, wheel weights, and chains. Low hours, runs and works as it should.

Built this as a custom project a few years back. From what we have found it’s a 1961 BilBrook Go-Kart. Did pretty much a full custom build from the frame. It Has 1 inch WheelHorse hubs on a solid rear axle with disk brakes. It also had 10” wheelhorse rims on the rear from a Commando V8 if I remember right. The drive setup is a Predator 212 with a torque converter. Then chain driven to the sprocket. Has 4 brand new tires all around from when we did the build. Does around 30-40 MPH. $700 OBO Thanks for looking. Anthony

up for grabs is a 418–8. With the electric lift option. Nice to use with the snowplow or lifting any implement I purchased the tractor from an elderly gentleman two years ago . He was the original owner… It has about 1000 hours a perfect running M18 engine. Fully serviced ready to go weights and chains will come with the tractor if wanted This tractor is sold as pictured Contact with questions if need be. Thank you for looking no surprises no smoke no knocks new battery also installed in May or June in 22 take it for a test drive load it on the trailer and let her go. Ready for anything you could throw at it as far as work very strong tractor. Thank you for looking 845 7nine7 57.16 anytime

Late 80's vintage Wheel Horse Belt Buckle in original packaging. Part number 115034 $79 includes shipping within U.S.

I've been away for quite a while. My father passed away and now we need to sell his collection. First up, the Economy Jim Dandy. It has a low pressure electric fuel pump and a Mr. Gasket pressure regulator on it but still overpowers the needle. Otherwise, it's a good little tractor. Asking 500.00.

Starts, runs and drives in both forward and reverse. Appears to be all original ,except seat which is in very good condition. $750 OBO, active and retired military, police, and firefighters will get a discount. Very good condition 48" mower deck and dozer blade available for extra. IMG_6986[1].MOV

Pair of Wheel Horse 310-8 Speed Tractors....Parts or Repair...Both Tractors have 10hp Kohler Engines and 8-Speed Transmissions...Both Engines Turn Free and Have Good Compression....I have NOT tried Starting Them....These Tractors have not been Run in a Couple of Years ...They will need the Fuel Systems Cleaned etc...They Come with a Really Nice and Solid 36" RD Deck...Check the Pics , What You See is What There Is....340.00 Takes All.

Wheel horse C195. Has roller kit on deck, foot control, 520 steering conversion, steel tread plate seat pan, bagger and upgraded predator engine. Runs and mow's great. 1-616-841-8977

1961 701 for sale complete and original w/ mower deck. Runs but needs TLC.

856 package recently purchased from the original owner. This tractor was always stored inside. The details of what comes with the package are below. This would need to be picked in MA. Thx. 1. 856 tractor 2. 36” deck, RM-366, that needs 1 new spindle. 3. HL-5 head and tail light kit 4. AC-675 cultivator, 2 piece 5. PP-101 plow and coulter 6. ST-376 snow thrower, 37” 7. DP-871 disc, double 8. Extra belts and blades 9. Original documents and keys

Im selling a '56 RJ35 parts tractor . What's in the pics is what is there and it has a Clinton engine. I'm not far from the Ohio turnpike in Richfield Village. I can send anyone more pics if they like. I didn't know exactly how to price this so after talking to a member I'm now asking $300 or offer. Cross posted and no trades please.