Leaderboard

1976 Wheel Horse C-120 that’s been fully professionally restored mechanically & cosmetically . The tractor has a rebuilt cast iron kohler k-301 (12hp) that runs flawless . The transission is a cast iron 8- speed uni drive that’s been fully gone through . Rear tires are 23x8.50-12 Carlisle ags & fronts are 16x6.50-8 vredestrin 5 rib . All cast iron weights are oem wheel horse . This is a turn key machine that can be put to work or for show . C-series wheel horse tractors are built to last . You will not find a nicer machine . $4k tractor only no blade . New old stock grader blade, or mower deck available for additional . Trades welcome for 400/500 series machines or 1964 or prior wheel horse tractors . Location : Southington , Connecticut Can be shipped . 📞 860_681_3610 IMG_8399.mov

I have a Suburban tractor in good running condition. The motor is rebuilt ( Lauson 5.5 hp) with a .020 over piston and new valves. It has a 32” mower deck, snow plow, front mounted sickle bar and trailer and spare trans. Overall in good shape but needs a few things. The charging system isn’t putting out enough voltage and could be cleaned up a bit. It’s hard to find the sickle bar for these tractors so that’s a plus. Any questions, just ask but price is firm

Early wheel horse RJ-58 (serial 1636) the tractor has the original clinton B-1200 that runs excellent . The tractor comes with the stuff it was Purchased new with . Disc harrow, cultivator , bottom plow . 📞 860_681_3610 Location : Connecticut Can be shipped $2850

C-160 Automatic for sale local barn find hydro lift runs good seat is still comfy! IMG_1861.mov

C-85 runs and drives. Lights work. Has new tie rods, battery, gas line, drive belt, rear lights. Tires have good tread and hold air, some cracking. Comes with 36” RD deck with mule drive.

C-105 runs but smokes. I consider this a project machine. It’s complete minus a battery. New decals from Terry.

These have been sitting in brush where I parked them 25 years ago and need to find a new home. Dug them out from where they settled in this week. I know 2000 RPM cat 0 attachments are hard to come by, so I'd hate to just junk th em. Make an offer for one or all. As everyone says, they worked when stored, but nature takes its course. The engine has very few hours after being long blocked in the late 90's, but I can't say what deterioration occurred in the wild. I'm tempted to salvage that for myself, but why...

I have wheel horse decks in various conditions. All are good for parts or can be used. 36” and 42”. Prices 25-75 a piece. Located in Mechanicsville, VA. Come and take your pick. No shipping. Any questions you can contact me via private message.

I have a pretty nice Work Horse GT1848 and a parts GT1800 for sale. The GT1848 i had running last fall. It ran OK but definitely needs the fuel system cleaned out. I have an Amazon carb that goes with it as well. It has a pretty nice 48" deck on it and practically new deestone ag tires. Hood has some dents toward the bottom and i think the dash has some extra holes, otherwise sheet metal is pretty nice. The GT1800 is probably best for parts. Appears to have been setting for a long time. Has had the engine replaced at some point. It turns over but that's all I know about it. Has a rear lift and weights on it but most of the concrete appears to be gone from the weights. Asking 400 OBRO for all of it. I'd love to keep them but I have more tractors than I'll ever be able to do anything with.

Professionally Rebuilt Kohler engines. All are drop in ready, add oil and supply gas. I’ve been rebuilding old Kohlers for decades and I’m retiring in January and won’t be rebuilding them any longer. Many of you know me and you know I don’t take short cuts and rebuild these engines with pride. I’m 15 minutes off 95 in Mechanicsville, VA. Or you can arrange shipping via Fastenal. No core required. Any questions you can leave a number or contact me via personal message. Magnum 12 Wheel Horse spec engines and k301 Wheel Horse spec. Torn down to the bare block, bored .010, crankshaft ground .010, Valve seats ground, new guides reamed, head decked. New piston, wrist pin, rings, rod, valves, guides, seals and gaskets. Rebuilt Carter carburetor, new fuel pump, carburetor, air filter and plug. These engines are completely in spec per Kohler standards. 925.00 a piece.

NOS Nylint Wheel Horse Semi Great piece to add to your collection. Located in Syracuse, IN Can ship for extra $$$

There is two belt guards. One is a repop and the other is original. Original has a few pin holes from sitting over the years before being found. But definitely savable. $175 takes both and includes normal stateside shipping.

For Sale NOS M12S Short Block, still in the original box. I bought it pre-emptively when Kohler was phasing out the Magnums. Thought I would have it on hand if one of mine needed it, or maybe I would find a tractor with a busted rod for cheap. Neither of those things happened, the darn things just keep running. Part number 77 522 35, probably built in late '05, it's the combination replacement kit Kohler made to fit WheelHorse or Gravely, machined to bolt into Gravely transaxle, also includes spacers to mount WheelHorse PTO clutch/brake. Packed with a bunch of gaskets and seals, probably all you need to install. And it's heavy, so it's not practical for me to ship. Buyer arrange to pick up NW of Elida Ohio. Someone needs this. Price reduced, asking $400.

Was running great on my 416-8 but hasn't been used in a few years; been sitting idle, as you might be able to tell; time to sell her to someone who has a need. Feel free to connect via email if you have any questions.

I bought a 5xi package yesterday including some attachments I'm not going to need: 4' plow, model # 79355 - in great condition, very minor surface rust on crossmember and back side of blade. $250 48" mower deck with blower and bagger - in good condition, working when removed from tractor yesterday. Previous owner said it never clogged on him. Some surface rust on deck and one 2" hole near the center. $300. I'm open to offers and interested in trades! I'm looking for a 2-stage snow thrower, p/n 79366. Maybe tools, etc. Available for pickup--let me know if you have any questions. Thanks! Here's a photo of the deck that's included. It's got some rust holes, but functions perfectly. Most of the price here is wrapped up in the blower & bagger:

Looking for one of the tractors to rebuild doesn't have to be in good shape but all there or some small pieces missing just looking for a project to do thanks

Looking for a fender pan for a 704

701 gas tank. Good shape. Thumb screw threads good, dash screw threads not so good. Can be re-treaded with heli-coil or equivalent. (Not included) Bottom plug missing. Two extra holes drilled on right side. Shipped via Ground Advantage at my cost based on your zip code. Can be picked up.

Hello to all Wheel Horse Tractors! From what I see on your sight, I have a 1988/89 tractor for sale. It belonged to my sister-in-law who lives on a horse farm. She had knee surgery, which then resulted in a frozen knee, so can no longer climb onto the tractor. She sold it to me, but the mower is too big for my property. She loved the wheel Horse, had it maintained every year. It starts right up, the mower works. Everything appears to work on it, though it is missing the rear taillights or reflectors. I live near Zumbro Falls, MN. Am asking $600.00 for it. If anyone is interested, you can contact me at: maxjensch@aol.com Sincerely, J. Jensch

RJ35 Hood for restoring you RJ 35 Wheel Horse. This hood was rescued and repaired by a Autobdy shop man . The before picture makes the end result hard to believe! Buyers can pick up only In Greencastle, Indiana - no shipping of this item ! Several before shots. And several after redo.

Seat bumper Brand new, never used. Part number 108889 to fit 300,400 and 500 series tractors. Price is $5.00 each plus shipping. I have several. These measure 1.5" OD x 5/8" thick with a 5/16" center hole. Here are two of them installed in one of my tractors.

K321 Wheel Horse spec engine. Torn down to the bear block, bored .020, crankshaft ground .010, Valve seats ground, new guides reamed, head decked. New piston, wrist pin, rings, rod, valves, guides, seals and gaskets. New fuel pump, points, condenser, carburetor, air filter and plug. This engine is completely in spec per Kohler standards. 950.00

Brand new never used 2007 315-8 60 th anniversary • 48” wide discharge deck • Can be delivered to Pennsylvania show in June (860) 681-3610 $6,250 Location : Connecticut Can be shipped anywhere Open to trades .