Im deciding to sell my fiberglass hood RJ. The person I received it from owned it over 20 years as it sits. I know there is a lot of debate on these as to what's early, late, right or wrong, as so many changes were made, so I will describe it the best I can. It has the early clinton engine (1200 152) with a fairbanks recoil. It has the early style welded bar front axle stop, grease zurks that are screwed into welded on nuts, c channel iron frame, and no exhaust clamp holes, nor a stop on the drive lever. There is paint peeling in some places that shows/ suggests it has not been repainted, (though the seat pan may have been red originally)but I cannot guarantee that. The wheels appear to have always been white, the rear tires are not BFG silvertons, they are Mansfield's which also were produced in the 1950s(the company has been out of business since the 70s). They have some bulging of the tube but at low pressure they hold absolutely fine. It has a cable operated brake on it, not a rod. It also has a button lock style lift handle, which to my knowledge was not on any early 55s, but looking at it I see no signs of modifications being made whatsoever...not knowing what changes were made in what order, as they made so many on the first months. It has a small, suspended fuel tank that doesn't seem to match the later ones, as it cradles an oval fuel tank and is fully hidden from side view, nor does it have the support struts of the typical 1955 model. There is no signs of modifications to these as well. When I got it, the front tires were completely trashed, so they have been replaced, and the belt guard was missing (previous owner thinks he through it out by mistake) I did buy a reproduction guard for it. I removed the engine and went through it to get it running. It appears to be very low hours, and shows little wear. I removed the original walbro lmg carb in favor of a new old stock lmb to get it running. The original carb did work but needs rebuilding. It runs well. The original carb and the original front tires will come with it. The front axle was seized, and I had to free it up, causing some paint loss on the axle itself. It does not have cable steer, or aluminum steering wheel, but appears to not be exactly the same as later ones either, the drag links pin to the knuckles upside down in comparison to a later production machine. (Possibly one of the early warranty replacements as the only unpainted item is the steering wheel shaft itself) There is some flaking paint around the rims, as well as the back of the fiberglass hood. The hood shows no physical damage. The original throttle and kill switch work. It is a switch, not a button, but shows no signs of ever being the larger hole for a button. I have driven it around a few times and it seems healthy, the lmb carb is not quite big enough for work duty but it idles really nice and cruises well. I am describing it to the best of my ability with what I have gathered and observed. Price seems to be subjective in this case, but I do feel confident it has Alot of significance to it, given the evidence. Feel free to email me for more pictures or questions about it.









Recommended Comments
There are no comments to display.
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now