Big Jake 18 #1 Posted April 9, 2016 I pick up a 414-8 with no deck. I put a 42" RD deck under it but now I need the drive belt. Can someone tell me part # or size thanks Jake Share this post Link to post Share on other sites
daveoman1966 3,611 #2 Posted April 9, 2016 What is the deck model # ? Should be a metal tag or a plastic decal on the left rear corner. Share this post Link to post Share on other sites
Tankman 3,515 #3 Posted April 9, 2016 Hope I got this right, been a long time since I've worked on an RD deck. I'm sure someone will verify my guess.. Mower Rotary spindle belt 6886 Gates 1/2"x86" 4L860W Napa 1/2"x86" 248-086 Stens 1/2"x86" 84860 Goodyear 1/2"x86" Not listed @ Dayco L486 1/2"x86" (.500"x086") Share this post Link to post Share on other sites
daveoman1966 3,611 #4 Posted April 9, 2016 Rear deck model 05-42MR01 needs DRIVE BELT # 108334 ( 98" long x 1/2" wide). That is from the Toro schematics. The belt is near $20 bux on-line. Share this post Link to post Share on other sites
953 nut 51,721 #5 Posted April 10, 2016 12 hours ago, Tankman said: Hope I got this right, been a long time since I've worked on an RD deck. I'm sure someone will verify my guess.. Mower Rotary spindle belt 6886 Gates 1/2"x86" 4L860W Napa 1/2"x86" 248-086 Stens 1/2"x86" 84860 Goodyear 1/2"x86" Not listed @ Dayco L486 1/2"x86" (.500"x086") This is the one for the three blades on the mower, the drive from the PTO is 98" as Dave said, 4L-980 or A-96. Share this post Link to post Share on other sites
