davem1111 2,156 #1 Posted July 3, 2022 Has anyone found a source for NOS or remanufactured and reasonably priced headlight bezels for these or other models they may fit (or anyone have a few they don't need)? Wheelhorsepartsandmore has them on eBay but at $40 a pair, that seems a bit excessive to me, but as a co-worker once said when he said he had a push mower for sale and I asked how much he wanted for it, his answer was "whatever the market will bear". If that is the best or only price around, I may try to see if I can 3-D print them (daughter's boyfriend has a 3-D printer but is out of town for a while), or make a mold from a pair of good ones I have and try to make some myself. Or find a used hood that has decent ones in it for that price or less... Thanks! 1 Share this post Link to post Share on other sites
Snoopy11 5,718 #2 Posted July 3, 2022 11 minutes ago, davem1111 said: make a mold from a pair of good ones I have and try to make some myself Wheel Horse parts and more is an awesome source, so quality there is certainly second to none. As far as making your own... I considered that myself... and I think it is certainly possible. I have seen some on Ebay for... not-so-wonderful condition... Don 1 Share this post Link to post Share on other sites
tunahead72 2,543 #3 Posted July 3, 2022 A-Z Tractor usually has used ones in stock for about $10 each, but I see he's out of stock at the moment. You could give Lincoln a call there and see if he could put a pair aside for you if you're not in too much of a hurry. I bought one side from him a couple of years ago, it's in good shape, not perfect, but quite good enough for my old 310-8. 1 Share this post Link to post Share on other sites
Thor27 835 #4 Posted July 4, 2022 I'm sure Lowell is the only one reproducing them. I remember before Lowell started making them, clean used ones brought big money on the auction site 1 Share this post Link to post Share on other sites
