Scrapguy 12 #1 Posted June 13, 2022 Recently changed the drive belt and idler pulley on my 1976 C-120 automatic. Noticed my clutch brake assembly (old WH part number 104730, new Toro part 94-6652) was worn down nearly to the rivets. After Waiting for over a month, I was told, no shipping possible. My local Toro shop secured one from another shop. It looks to be a correct part but the rivets holding the friction material seems slightly proud. Old guy me remembers riveted brake shoes having counter sunk rivets. Don’t want to use this part as i believe the rivets will score the main drive engine pulley. I can’t seem to find this part as a NOS part anywhere. Any suggestions? Share this post Link to post Share on other sites
daveoman1966 3,839 #2 Posted June 13, 2022 I'd be real tempted to (1) drill-out and remove the brake pad. (2)Trace the dimension to a used auto brake pad of approx same thickness. (3)Cut it out with whatever tool, and (4)JB Weld that in place of the original 'brake pad'. (5)Clamp and let set for 24 hours. OR... spend about $35 for a new one here: https://www.rcpw.com/parts-lookup?arisku=94-6652&arireturnurl=https%3A%2F%2Fwww.rcpw.com%2Flookup%2F%23%2FToro_Consumer%2F73423%252c_416-H_Garden_Tractor%252c_1996_(SN_6900001-6999999)%2FPto_Clutch_Linkage%2F130fedcd-8714-4a7d-bad1-736b430179b4%2Fc7a50fb0-498c-489a-9c85-3a54fd785a0e&aridescription=BRAKE+ASM&aribrandcode=TO Share this post Link to post Share on other sites
Scrapguy 12 #3 Posted June 13, 2022 Thanks for the reply. I’ll likely take back the new part I picked up today and try ordering another NOS Share this post Link to post Share on other sites
76c12091520h 3,892 #4 Posted June 14, 2022 4 hours ago, Scrapguy said: Recently changed the drive belt and idler pulley on my 1976 C-120 automatic. Noticed my clutch brake assembly (old WH part number 104730, new Toro part 94-6652) was worn down nearly to the rivets. After Waiting for over a month, I was told, no shipping possible. My local Toro shop secured one from another shop. It looks to be a correct part but the rivets holding the friction material seems slightly proud. Old guy me remembers riveted brake shoes having counter sunk rivets. Don’t want to use this part as i believe the rivets will score the main drive engine pulley. I can’t seem to find this part as a NOS part anywhere. Any suggestions? See our listing in the vendors section of the classifieds, private message me if interested 2 Share this post Link to post Share on other sites
